Odin Works Gas Block Adjustable .936" Low Profile Ar-15
$89.00
$75.55
Save 15%
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
ODIN works tunable has block
This gas block works just as it should. It fixed my over gassed AR-10 in 6.5 creedmoor. Went from a four shot 4” group to a 4 shot 1 ragged hole at 100 yards. Can’t really say anything bad about it. I would definitely buy another one
Definitely a good one, if it fits.
It's a good design, easy adjusting if you want to switch between suppressed and unsupressed.
The only thing is that extra part sticking out, if you have a slim handguard with a bull barrel, like 0.936 at the gas block, this thing is hard to fit in.
I'm sure this thing will fit well for 0.750 or less .
The only thing is that extra part sticking out, if you have a slim handguard with a bull barrel, like 0.936 at the gas block, this thing is hard to fit in.
I'm sure this thing will fit well for 0.750 or less .
Would recommend: Yes
gas block.
My semi auto ar -10 .308 after a few rounds would turn into a bolt action having to chamber each round. after realizing i need to adjust the gases i bought the odin works adjustable gas block and i have been able to put down range several 25rd mags.
Would recommend: Yes
affordable and quality
Odin works has really high quality products and this gas lock is no exception.
for a .936 gas lock for my heavy barrel it was a breeze to install has two locking screws and a very tactile and audible gas setting screw with 20 clicks from fully closed to fully open. Making it great for fine tuning your rifle instead of those factory three setting gas blocks (full/half/closed).
additionally and best of all is that it was not as ridiculously prices as other brands wanting to charge hundreds of dollars for similar functions. This one was prices at around $70
for a .936 gas lock for my heavy barrel it was a breeze to install has two locking screws and a very tactile and audible gas setting screw with 20 clicks from fully closed to fully open. Making it great for fine tuning your rifle instead of those factory three setting gas blocks (full/half/closed).
additionally and best of all is that it was not as ridiculously prices as other brands wanting to charge hundreds of dollars for similar functions. This one was prices at around $70
Would recommend: Yes
Gas block for 6.5
Went on easy and was simple to adjust I am not writing a book
Would recommend: Yes
Good Gas Block
Good gas block. Functional and easy to adjust. Make sure your hand guard spacing is adequate for this device as it will not fit some slim handguards. Dimensions are available on the product website.
Pros:
- Eaay to adjust
Cons:
- None
Would recommend: Yes
Great gas block
Looks to be very well machined. No tool marks anywhere. Have not had a chance to go to range yet and try it out. I’m sure it will work just fine. I like and have use some of their other products and they are great, so I am sure this will as well.
Pros:
- None
Cons:
- None
Would recommend: Yes
Fixed all of my chambering issues.
Will not fit under a slim handguard, modified handguard and it worked flawless.
Would recommend: Yes
Odin Works Gas Block, which fits the .936 Low Profile
The .936 adjustable Gas Block will not fit under the Atlas R-One Handguard. Do not buy this if you are using a smaller diameter Handguard.
Pros:
- There are no pros if your weapon gets damaged.
Cons:
- Too Big won't fit
Best Used for:
- paper weight
Would recommend: No
0 of 1 found the following review helpful.
******DO NOT BUY*****
****DO NOT BUY****Some idiot put an extra nubby out the side of it and it doesn't fit under a handguard. I had to spend all day grinding it down. It's horrible that they leave these pieces of garbage on the shelf and still sell them to people.
Violates the Law of merchantability. DO NOT BUY !!!!!!
Violates the Law of merchantability. DO NOT BUY !!!!!!
Would recommend: No
Awesome gas block
Ordered this part and it completely turned my build in a positive direction. I used this on a rifle length. 450 bushmaster and it fixed the undergassed issue without liiening the buffer. I'll buy again for future builds
Pros:
- High quality
Cons:
- None
Best Used for:
- builds
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?