Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Trigger upgrade
This is a great working trigger that I would highly recommend.
I you are not mechanically inclined I would not recommend installing this on your own, find a good gunsmith in your area.
It dropped the pull weight down to around 3.5 lbs and it will probably drop a little more once broken in.
Parts not compatible
My gunsmith installed this kit into my Echelon and the trigger would stick. And if you put your finger anywhere on the shoe other than the very bottom, you couldn't pull the trigger. Luckily for me my gunsmith had experience with this problem before and was able to fix it. He had to use the original SA trigger shoe & spring. Obviously, PRP did not do their homework on this Echelon kit. Very disappointing!
Pros:
- lightened trigger pull
Cons:
- Parts incompatible
Best Used for:
- Recreation
Would recommend: No
Nice upgrade
The Echelon trigger isn't bad out of the box, but this kit both eliminates the pre-travel, and lightens the pull considerably. Makes it much more inline with something like a Walther PDP. The sear assembly is fiddly to get back together, but otherwise it's a pretty simple installation. (Can always get a gunsmith to do it)
Pros:
- easy to install
- Better trigger pull
Cons:
- None
Would recommend: Yes
2 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?