Your Browser is Outdated
ProMag Recoil Buffer Ruger 10/22 and Charger PM201
List:
$27.30
$21.49
Save 21%
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Once you figure it out...
So I was that guy who didn’t figure this out right away, but the easiest way to install these is to remove the whole trigger pack. I tried, for about five minutes, to slide it in like the OEM bar but that clearly doesn’t work. Once I figured it out, it installed easily and works as expected.
Works great
Nice easy upgrade for your ruger 10 /22 rifle. Will definitely save wear and tear. My son in law told me about it. He also did this upgrade before he put a round through his 10 / 22. There's a nice u tube video showing just how to do it.
Would recommend: Yes
2 of 3 found the following review helpful.
Great cheap upgrade for your 10/22
Nothing much to say, this is a chunk of urethane rod that you replace the takedown pin in the receiver with. It works, makes the operation quieter and lessens the little bit of recoil the 10/22 has. Just buy these, you get three for the price of one other brand.
Would recommend: Yes
1 of 1 found the following review helpful.
very simple solution
most cost effective buffer out there. Outfitted 3 of my ruger 10/22 with these and in an effort to quiet things down in preparation for my .22 suppressor that Im waiting on. It definitely quiets the slap of the bolt a little bit.
Would recommend: Yes
1 of 2 found the following review helpful.
Good Upgrade for 10/22
Can't beat the price for three of these buffers for the Ruger 10/22. I have seen a higher price for jsut one of these buffers, so this is a great deal. I have noticed a reduction in the clanking noise due to the factory metal pin that comes in the 10/22. I have these in all four of my 10/22s and would recommend these if you are considering buying them.
Would recommend: Yes
1 of 1 found the following review helpful.
Pro-Mag Recoil Buffers
Shooting a .22 semi-auto-loader that has been modified for competition, one must consider all the options. One of those options is the fact that Sturm/Ruger thought to include a design factor that allows the recoil of this "light duty" rifle/weapon/tack-driver to have it's rather minor recoil buffered. Through months of personal testing I have found that this Pro-Mag model does the best job of that, on a consistent basis, through hundreds of rounds of varying muzzle velocities. I highly recommend them for ANYONE employing the Ruger Model 10/22 for any shooter's task. Results regarding the length of life cycle on these buffer pins may vary, but only slightly, and never catastrophically, between different loads, with almost no differences in accuracy, as long as you maintain vigilant observation between cleanings. Keep a few on hand!
Would recommend: Yes
2 of 2 found the following review helpful.
Works as expected
The buffer works nicely and helps to reduce the metal to metal slap when the bolt recoils back. I also like that you get three of these for when they wear out. Hopefully not soon.
Pros: Great for protecting metal to metal contact on recoil.
Cons: Took a little bit to align the product into second hole and push it through.
Pros: Great for protecting metal to metal contact on recoil.
Cons: Took a little bit to align the product into second hole and push it through.
Would recommend: Yes
2 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?