by
Rich,
Verified Owner
from CT, United States
Written on March 30, 2025
What can I say that hasn’t been said, OP is one of the few companies that will deal with commie CT- customer service and prices are great, barrel is exactly as expected.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
neb grendel,
Verified Owner
from NE, United States
Written on December 5, 2024
Roscoe makes a good barrel. This is a great hard use barrel that will last a lomg time. Seems pretty accurate.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Jeff,
from GA, United States
Written on March 9, 2024
Firstly I was very impressed with the packaging. The barrel came in a box within a box and was completely protected by foam surrounding the barrel. The fit and finish is flawless. A check with go, no-go gauges proved the chamber. I also like the gas block dimple which speeds up installation. Although I haven’t shot this build yet I will update this review if necessary.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Dan,
Verified Owner
from FL, United States
Written on February 18, 2024
Barrel is nicely finished . Fired great ! For the price you can’t bet it ! Fits nice !
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Easystreet,
Verified Owner
from GA, United States
Written on July 30, 2020
Misaligned dimple job caused this barrel to be badley under gassed. Operates like bolt rifle shooting supers or subs both suppressed and unsuppressed. Looking closely at gas tube from above it is slightly angle from gas block to upper receiver. I discovered that the dimple at bottom of barrel is off of the 6 o'clock center line and causes the gas block screw to torque the gas block off of the gas port when tightened. Instead of hassling with the return process I'm waiting for a clamp style gas block to arrive. As other reviewers have mentioned qualty control is a Rosco issue. A product with potentially great quality is being sabotaged by sketchy QC. BTW this is my second Rosco barrel and the first has been 100%. This one unfortunately has been a dissapointment so far. A lttle less time on insta and more attention to product detail might help these guys.
Would recommend: No
6 of 7 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
squirtlocker,
from AZ, United States
Written on June 6, 2020
10.5 300 using aero enhanced upperand gas tube, bcm gas block. No issues suppressed or unsuppressed. 500 rounds no problem all factory new ammo subs and supers. About 1 moa at 100 using dot from bench. With scope maybe sub moa
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?