Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Sako ring mounts
I have used Sako ring mounts on all of my six Sakos. Best mount available. They are easy to install and have always held my scopes securely. Will buy them for my future purchase. I have used the low mount on my scopes up to 50 mm.
Most Helpful Negative Review
Know your scope/rifle before buying rings or ringmounts
I purchased a Sako 85 Finnlight (long action) and decided to go with the Sako Optilock Ringmounts. Looking at both options, I though the ringmounts were a better choice.
There is no question the ringmounts are well constructed, if a bit heavy. The plastic inserts that protect the scope work well ...
Read More...
Read More...
SAKO Optilock scope rings and mounts
The product is SAKO Optilock scope rings and mounts. The reason for 4 stars has nothing to do with the quality of the product but the particular mounting system required by the SAKO L 461 receiver. If you have a SAKO receiver similar to the L 461 this is your only option. Once properly secured they are fine.
As a side note. I handled the order over the phone and your employee that assisted me was head and shoulders above anyone I've had contact with in some time. Her name is Emily and she knows what she is doing and a great asset to your company.
As a side note. I handled the order over the phone and your employee that assisted me was head and shoulders above anyone I've had contact with in some time. Her name is Emily and she knows what she is doing and a great asset to your company.
Would recommend: Yes
Sako optilok ringmounts
Great product extremely well made. Would have given it 5 stars except the ringmount screws were as little hard to deal with and s little hesitant to put as much torque on them as I would have liked. If its Sako you really can't go wrong
Would recommend: Yes
optilock ringmounts
I have a new Tikka T3X and the rings did not fit the factory rails, however they looked like a well made. rings and mount for the wright rifle. I would try them on a different rifle, they did not fit this rifle however.
Would recommend: Yes
1 of 3 found the following review helpful.
30mm Low, blued on Sako 75VI
This seems to be a solid ring mount. It is expensive but with Sako rifles you don't have many options. I would like to see this in a matte finish. I had these Cerakoted to match my VX-6 2x12x42. These rings clear the scope with plenty of room for scope caps.
Pros:
- low profile for an optic
Cons:
- None
Best Used for:
- mounting scopes
Would recommend: Yes
3 of 3 found the following review helpful.
Sako Optilock Ringmounts
These are very well made in Finland, and fit and finish are what you would expect from Sako. These ringmounts attach to the integral base that comes on many Sako rifles, and I suspect would not fit most anything else. They fit perfectly, the plastic liner ring inside the metal ring protects the scope finish and aids in alignment. The recoil pin (designed into the ringmount for Sako 85 and others) strengthens the connection during recoil. The front ring is location is moveable to skew left to right scope alignment (to minimize windage reticle adjustment on the actual scope). These are very tailored to the Sako rifles and worth paying a little more.
Would recommend: Yes
1 of 1 found the following review helpful.
Solid and Rugged and better design
Very well built, I like these better than the Sako 2pc mounts. They are lighter and simpler and still have the plastic insert in them to prevent scope damage. They have 4 screws per ring which makes keeping scope alignment easier than the two pc types when tightening the screws down. They are also a little less expensive than the two piece Sako base and rings.
Would recommend: Yes
sako optilock ring mounts
These mounts fit my sako 85 perfect bUT the 85 has a dove tail design.if you mount your scope in the middle of the bace plate they are fine, but if you need to slide it to the front or back the scope will sit on the gun at a angle and won't have enough adjustment to correct it, therfore useless
Would recommend: No
4 of 6 found the following review helpful.
Sako Optiloc Ringmounts
The rings I purchased were the one piece rings, similar to the Leupold Ringmounts that I replaced, just a different height for the new scope. The Sako packet contained the two torx allan keys needed to mount the rings and simple instructions. The rings were covered by a protective film. The rings were easy to mount and the locking collar made it easy to slide the scope to adjust the eye relief without marking the tube.
After comparing the rings, I do prefer the look, feel and security of the Sako rings.
After comparing the rings, I do prefer the look, feel and security of the Sako rings.
Would recommend: Yes
1 of 1 found the following review helpful.
You get what you pay for!
I wouldn't use any other brand name ring in place of the Optilock rings, regardless of price. These rings fit the Sako integral mount precisely and they look as good as they preform.
Pros: Perfect fit, strong and solid ring with outstanding clamping force.
Cons: Hard to get.
Pros: Perfect fit, strong and solid ring with outstanding clamping force.
Cons: Hard to get.
Would recommend: Yes
3 of 3 found the following review helpful.
Great buy
You can mount the scope lower and this combo is lighter then the two pc system.
Would recommend: Yes
1 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?