Your Browser is Outdated
SB Tactical HK Side Folding Stabilizer Brace for HK MP5/MP5K RS Clones
Currently Unavailable
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
GSG 5P - ah...YES!! (With modifications to the brace and gun.)
This is truly a great product!! It will make your GSG 5 pistol one of your favorite guns to shoot!!! If done right, it will raise the value, accuracy, and functionality of your gun!! > This can be fitted with a Dremel tool-grinder and power drill to the GSG 5P with modifications to both the inside of the brace cup and the pistol grip lower. (Best to have done by a gun smith unless you are comfortable doing the work yourself.) I did my own work and it turned out perfect. Note: Make sure you don’t remove to much material when grinding the inner cup or it will not fit firmly on your gun. The...
Read More...
Read More...
Fits ap5 like a glove.
Fits tight, took a little work. had to Dremel a small bit off the sides that meet the rails on the gun, But once on it's exactly what this gun needed. Functions and looks great, folds out of the way for storage.
Would recommend: Yes
2 of 2 found the following review helpful.
sb tactical is the best
All their products are solid. You won’t be disappointed. All my braces have their braces. They are made with quality materials and feel that way. They are easy to install and look way better than most on the market. I will continue to use them for all my brace needs.
Pros:
- Quality and easy to install.
Cons:
- None
Would recommend: Yes
Fit perfectly
I didn't need to do any mod to get the bolt to work correctly with my turkey made clone. getting it on was a little tight and took off some of the finishing on the back, its covered so you cant see it
Would recommend: Yes
Fit my PTR 9C
Purchased the SB Tactical HK Side Folding Stabilizer Brace for HK MP5/MP5K RS Clones for my newly purchased PTR 9C. Took me about two minutes to place on the gun. Fits perfect and looks great. Great alternative to making it a short barreled rifle.
Pros:
- Looks and fit
Cons:
- None
Best Used for:
- PTR 9C
Would recommend: Yes
1 of 1 found the following review helpful.
Good quality product
I installed this on my reverse stretch MP5 and it was a perfect fit. It was a tight fit but no need for any modifications to the receiver. Installation took less than 5 minutes. Ordering and shipping were fast.
Would recommend: Yes
Great addition!
Installed as per instructions. Makes the weapon much more controllable. Dramatically decreased target acquisition time and increased accuracy. A little pricey but well worth it. Very easy change over to the original configuration and back. Happy with the purchase. Highly recommend.
Pros:
- Great comfort and control
Cons:
- Pricey
Best Used for:
- MP5 and Clones
Would recommend: Yes
Disappointment
I have four SB braces between a Scorpion, Stribog and an SP5 and they all fit perfect and went on easy except the Sp5 Brace. It was a nightmare putting on. It was stuck at first and I thought it was going to damage my Sp5 by how incredibly difficult the push pin was. The metal on metal contact from the brace to the Sp5 scratched the finish and the push pin couldn't align up or something and had to be tapped in with a hammer. It's definitely not coming out without a fight. After finally getting it on, its not a snug fit like others I've read about and causes the receiver to wiggle slightly. I'm really disappointed, my Scorpion and Stribog had no issues at all so I don't know what to say. Maybe I got a bad one. The box was also in rough shape.
Pros:
- it works
- Temp until SBR
Cons:
- Metal on metal which scratches the finish
- Had to fight it on
- Insanely tough push pin but loose reciever
Best Used for:
- Waiting to SBR
Would recommend: No
3 was not a charm
This pistol brace was intended to use on an HK SP5. The first.brace was wrong item in box was for a SP5K (which does not fit the SP5) The second pistol brace I had to use a small plastic mallet to install stock rear pin, had solid lock up on when extended. Unfortunately the item arrived with markings that showed product had been mishandled That was returned for a replacement unit I was unable to install unless I modified the brace (drilled a larger pin hole) the lockup when extended was loose. So this item was also returned this time for a refund. Really nice product in concept but from my experience quality was hit or miss.
Would recommend: No
Great Brace
Opened the box and noticed the sturdiness and comfort level of the feel of the brace. Mounting it up to my PTR 9CT was flawless. Had no trouble inserting the quick pull studs thru the brace an into the gun. The folding stock release was a bit stiff but that does break in well after several cycles of the stock. It’s rigid feel helps in keeping you on target. Worth the purchase!
Pros:
- Sturdy , light , and compact
Cons:
- Takes a little bit of use to get the folding catch to break in other than that its ok
Would recommend: Yes
2 of 2 found the following review helpful.
Really pleased
I bought this to replace the SB Tactical’s AR style brace my Zenith Z5RS came with. The AR brace was Very very tight and required grinding to fit properly. This SB Folding brace fit perfectly without any grinding needed. Shipping was very fast.
Pros:
- Quality
Cons:
- None
Best Used for:
- Fit on my zenith Z5RS with no modifications.
Would recommend: Yes
3 of 3 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?