Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
STONEY POINT LEUPOLD TARGET KNOB
ORDERED 2 OF THESE FOR A LEUPOLD
VX-I 2-7 X 28mm RIMFIRE SCOPE #58700, AND THEY WOULD NOT WORK. THE ADJUSTMENT SCREW IS .050 SHORTER THAN A HUNTING LEUPOLD SCOPE, THEY FIT PERFECTLY ON MY 3- 10 POWER HUNTING SCOPE SO I LEFT THEM ON THAT SCOPE.
Most Helpful Negative Review
sadly disapointed!
1. the alen they sent with the target knob is the wrong size.
2. there is no spring in the set to keep the knob connected to the coin slot, so it rattles around.
3. its not what i would call a "precision" piece of equip. since the "laser" etched graduations on the barrel & turret do not line up ve...
Read More...
Read More...
Ok for leupold vx3 scopes
I have these on a leupold vx2, vx1 and vx3 scopes. I believe they work best on vx3 scopes because the scope has an audabile clicks. The other two I’m always wondering if the target cap has come off the coin slot. Especially the vx2. Because I can’t feel much resistance. It’s a pain to check. The best solution on this scope would be to send back to leupold to have the elevation adjuster replaced with a target knob. But living in New Zealand, the cost of postage makes it to expensive. I’m pleased with the vx2 2-7x32 scope on a .22. Great field of view. And sight picture.
Best Used for:
- Vx3 scopes
Would recommend: Yes
2 of 3 found the following review helpful.
target knob
one was missing a shim spring guess QC
was on break when that one came through
50% approval......
Cons: incomplete
was on break when that one came through
50% approval......
Cons: incomplete
Would recommend: Yes
1 of 3 found the following review helpful.
Stoney Point Target Turret Knob
I only purchased one of these knobs for the elevation adjustment only on a Vari-X II. Initially, I like the product,and this saved me the purchase of another scope. I have it mounted on a rifle, but have not had a chance to see how it works in long range yet.
Pros: An economical alternative to a new scope
Cons: a little difficult to set up. - "No Clicks" during adjustment
Pros: An economical alternative to a new scope
Cons: a little difficult to set up. - "No Clicks" during adjustment
Would recommend: Yes
3 of 4 found the following review helpful.
Stoney Point Target Knob for Leupold Rifle Scopes K-1L
They work well enough to get you through a fun shoot, or for casual long range shooting, but I think the statement in the write up "Serious Long Range or Target Shooting" is a stretch. They don't give the total range of adjustment needed for that, and are a bit too lose abd reqire shimming. But they do allow some long range fun without buying another scope with turrets.
Pros: Easy to Install
Cons: Lacks Total Adjustment
Pros: Easy to Install
Cons: Lacks Total Adjustment
Would recommend: Yes
4 of 5 found the following review helpful.
Taget Knobs
You will need and O-RING to take up the space but that was amd easy fix. Works very well on old scope without click adjustments, allowing very small adjustments in impact area.
Pros: Easy to install Make micrometer adjustments
Cons: need shim to take up play
Pros: Easy to install Make micrometer adjustments
Cons: need shim to take up play
Would recommend: Yes
8 of 9 found the following review helpful.
Good enough, but lacking...
Overall, I think these were a good addition to my vxII, but the fit is a bit sloppy to be honest. They fit on the housing and provide nice solid clicks, but there is play to either side, and for $60 a pair, I expected something that would mate up tight, OEM style. Still, not bad enough that I sent them back and they make the scope much more adjustable on the fly.
Pros: Clearly marked, provides good tactile clicks
Cons: Doesn't anchor solidly
Pros: Clearly marked, provides good tactile clicks
Cons: Doesn't anchor solidly
Would recommend: Yes
6 of 7 found the following review helpful.
Stoney Point Target Knob
Bought 4 of these for Leupold 3-9X33 EFR's mounted on rimfires with Burris Signature rings.Both scopes are set at centre of adjustment using the Burris insert kits so have no concerns running out of adjustment while using these turrets. Easy to install but found upper half could not be tightened to eliminate "wobble".Fitted a 3/16X5/16X1/16 O ring to each spindle under lower half of turret to get rid of play and turrets are now firm and reasonably precise. Graduation marks match Leupold closely. These turrets are adequate for casual range shooting and can quickly be removed and replaced by Leupold covers for hunting situations.
Pros: Convenient
Cons: Expensive
Pros: Convenient
Cons: Expensive
Would recommend: Yes
8 of 9 found the following review helpful.
Stoney Point Target Knobs
Good bargin Target Knos for your Leupold Scopes. Great for range use and can be uninstalled for field use.
Pros: Easy to instal and Use
Cons: Hard to use if installed improprly
Pros: Easy to instal and Use
Cons: Hard to use if installed improprly
Would recommend: Yes
1 of 5 found the following review helpful.
Not great but not bad
It seems to me that something this simple shouldn't cost so much, however it is very easy to set up, and makes shooting in different conditions a lot easier. Next time I will just buy a scope with target knobs on it.
Pros: ease to set up
Cons: price
Pros: ease to set up
Cons: price
Would recommend: Yes
1 of 5 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?