Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
TRAVISTY's Review of Strike Industries CZ P-10 F Magwell
A nice $14 addition to my CZ P-10F OR SR that works very well.
The only issue I found was the gap tolerance between the magwell and the OEM CZ 21rd mag baseplates was too tight to allow an easy mag insertion without some force. Thankfully, the polymer baseplates are easily removed and a light sanding to remove less than 1/16" from the top of the baseplate was all that was needed. Took only about 25 strokes with 80grit followed by 25 strokes with 400grit sandpaper to smooth out the 80grit scratches. Now the mags snap it just as easily as without the magwell.
The only other issue is the head of the screw to secure the magwell would look better with a countersunk flat head than a round head. I may replace it later purely for aesthetics.
The only issue I found was the gap tolerance between the magwell and the OEM CZ 21rd mag baseplates was too tight to allow an easy mag insertion without some force. Thankfully, the polymer baseplates are easily removed and a light sanding to remove less than 1/16" from the top of the baseplate was all that was needed. Took only about 25 strokes with 80grit followed by 25 strokes with 400grit sandpaper to smooth out the 80grit scratches. Now the mags snap it just as easily as without the magwell.
The only other issue is the head of the screw to secure the magwell would look better with a countersunk flat head than a round head. I may replace it later purely for aesthetics.
Pros:
- Inexpensive
- works well
Cons:
- Tight tolerance
- Ugly screw
Would Recommend:
Yes