Your Browser is OutdatedWorks like a charm... - Sure Cycle Stoeger Shotgun Magazine Extension Tubes
Compare (0)
1 item has been added
Add at least two items to compare
dustydog's Review of Sure Cycle Stoeger Shotgun Magazine Extension Tubes
Easy install & full-complement (8+1) flawless functioning.
Just make sure to secure the *unloaded* shotgun so that the spring can't push it away from you when installing, and note that the nut for the barrel clamp is practically captive when installed due to the shape of the clamp, thus, it's best not to turn the nut to torque as it will likely bugger-up the clamp (most sockets will not engage it anyway due to the ears of the clamp holding the socket off).
Just do your torquing via the swivel stud (very minimal required if you line the clamp with friction tape as I did) and, if the stud hole doesn't end up in the preferred orientation when desired torque is reached, just back it off until you can "re-clock" the nut to different flats that give you the best combo of torque/stud orientation.
Just make sure to secure the *unloaded* shotgun so that the spring can't push it away from you when installing, and note that the nut for the barrel clamp is practically captive when installed due to the shape of the clamp, thus, it's best not to turn the nut to torque as it will likely bugger-up the clamp (most sockets will not engage it anyway due to the ears of the clamp holding the socket off).
Just do your torquing via the swivel stud (very minimal required if you line the clamp with friction tape as I did) and, if the stud hole doesn't end up in the preferred orientation when desired torque is reached, just back it off until you can "re-clock" the nut to different flats that give you the best combo of torque/stud orientation.
Pros:
- Red follower is a great visual indicator
Cons:
- Extension tube cap *may* be plastic?
Would Recommend:
Yes
1 of 1
found the following review helpful.