Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
It is a buffer
This is like comparing Cadillac and Chevrolet. Both are cars and both do the same thing. One just cost more than the other. Just as with this buffer. It is not the most expensive nor does it have to be. The only question should be does it do it's job and the answer is yes. Spend $50 bucks or more on...
Read More...
Read More...
Most Helpful Negative Review
No Impressed
Theese buffers have a spray paint type paint finish that chips off easily. It seems solid with no moving internal weights. I'm thinking about removing all the paint to prevent buildup inside the buffer tube. The paint could end up causing reliability problems. Not recommended.
must have for fine tuning your AR
a selection of buffers is a must for all AR builds.
just pack a selection of different weights and it makes fine tuning your rifle much quicker and real time while youre at the range.
Just watch the ejection patterns, what position the BCG stopped and carefully note what types of malfunctions occur.
installs like all other buffers.
just pack a selection of different weights and it makes fine tuning your rifle much quicker and real time while youre at the range.
Just watch the ejection patterns, what position the BCG stopped and carefully note what types of malfunctions occur.
installs like all other buffers.
Best Used for:
- fine tuning AR
Would recommend: Yes
It has it's place
They work as intended. I am satisfied. Used them on a 6.5 Grendal platform that was over gassed
Would recommend: Yes
A must have for pistol builds!
I love this item and it gives you, a noticable difference in cycling and recoil!
Would recommend: Yes
Basic buffer
Needed a heavy buffer for an AR-15 chambered for 7.62x39. Used with an AR-10 buffer spring. Buffer fits fine, finish is decent, and it doesn't rattle. This buffer and heavy spring were ideal for this caliber; no complaints.
Would recommend: Yes
Great for AR lower when using 7.62x39 upper.
I replaced the milspec buffer on my PSA classic lower with this heavy buffer to smooth out the recoil when joined to my BCA upper in 7.62x39. Good recoil management, good shell ejection. Great price. Quality product.
Pros:
- price and quality
Cons:
- None
Best Used for:
- 7.62x39 and other calibers larger than 5.56
Would recommend: Yes
1 of 1 found the following review helpful.
Cheapest Heavy buffer out there
Nice and hefty H1 and H2 buffers that I bought. Keep in mind that these are mystery metal and don't have removable tungsten weights. Of course, tungsten would be a steal at this price point. The finish wears easily and the H2 buffer is longer than a standard carbine buffer. Nevertheless it does the job.
Would recommend: Yes
1 of 1 found the following review helpful.
be careful for the price not bad will keep!
The buffer end pad is a hair to long and does not let the bolt catch, catch the bolt! Took psa buffer out of my other build and worked flawlessly! Going to sand down the pad. can’t complain for the price just don’t want to see someone else have the same problem!
Would recommend: No
1 of 1 found the following review helpful.
Gets it Done Reliably for Less
The buffer appears well made. Mine was painted which is okay. The buffer is typically in a lubricated and non-visible area so the most important attributes are cycling function and durability.
I just finished building an 8.5” 300AAC pistol build with it, so only a couple of range trips with it so far. It has been 100% on loads from 110-220gr. Time and round count increase will tell if this is a good buffer.
I just finished building an 8.5” 300AAC pistol build with it, so only a couple of range trips with it so far. It has been 100% on loads from 110-220gr. Time and round count increase will tell if this is a good buffer.
Pros:
- cost
- cycling function
Cons:
- None
Would recommend: Yes
2 of 2 found the following review helpful.
Great price for product
This company made the perfect solution to my ar pistol stove pipe problem. It's the perfect weight with a new spring and I have cycled 300 rounds and not one malfunction actually it has improved the proformance drastically and the price optic plant has with coupons it ridiculousness not to buy
Would recommend: Yes
Tacfire AR-15 Carbine recoil buffer
I ordered this recoil buffer as a replacement for another carbine buffer I have. The biggest difference between the two is the Tacfire model doesn’t rattle when shaken back and forth unlike the unknown brand it replaced ( even though they both look alike ). It is solid compared to the first one.
Would recommend: Yes
1 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?