by
elrodbaer,
from CA, United States
Written on October 31, 2020
The low profile gas block from Tacfire is a good solution to clean up your barrel. I needed to remove my A2 style gas block in order to install some new tactical equipment. The low profile gas block was the answer. I removed the A2 gas block from my AR15 and installed the low profile unit. It did the job. I can now install additional tactical equipment without having something in the way. This is a great solution for anyone who finds that the A2 gas block is in the way. I would recommend this to a friend...
Pros:
- Opens things up for more gear.
Best Used for:
- Adding additional gear...
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Mike,
from WY, United States
Written on August 25, 2018
Fit and finish is good. Great price. Give it 4 starts, 5 later if works with my sights. Haven’t finished my build yet. Have low profile sights. Need to see how my sight fits. Like that the set screws are on the bottom. Makes it easier to dimple the barrel. All is always good when I’ve ordered from Optics Planet
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Derek,
from ME, United States
Written on May 13, 2018
No complaints here. Does exactly what it should do and the hardware was sufficient. Just bigger than i thought it would be when I ordered it. The low profile sfill fits under my free floating rail which is what I am guess you will use it for.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Chuck,
Verified Owner
from FL, United States
Written on May 12, 2018
Gas block was great, no issues with fitment. Only issue was the roll pin was not ‘rolled’ enough, so install was kinda difficult. Just took an extra few minutes. Looks really good on my new barrel. Had no problem fitting under the new free float barrel.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
jtrain,
from KS, United States
Written on March 31, 2018
Tried to fit into the Odin Works gas tube I ordered. The hole in the gas tube is machined incorrectly and gas port and roll pin hole would not line up. Overall, the finish on this part is poor. I plan on returning this and buy something higher quality.
Would recommend: No
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
NA,
from PA, United States
Written on March 2, 2018
This product is a good value. It is a true low profile gas block. Some gas blocks claim to be low profile, only to find out they will not fit under certain quad rail or other forearms. I use these on just about every build requiring a low profile gas block. The only con I have is the gas tube pins are usually not the right size. They seem too big. I've had to go with a different pin almost every time.
Cons:
- The gas tube pin is the wrong size
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Craig,
Verified Owner
from TX, United States
Written on January 29, 2018
Excellent Gas Block.. It was very easy to install and align with the barrels gas Block. I fired 200 rounds with this right after I installed it on a new build and had zero issues. Plus the for-end I had, fit over it perfectly.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Garrett,
from AL, United States
Written on March 10, 2017
This block does what it is supposed to do, and for the price, I would definitely but again. The block is fairly easy to install; however, I did have some trouble getting the roll pin inserted. As always, be sure to have spare roll pins around in case you lose or damage the one provided.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
WillieMc,
Verified Owner
from KY, United States
Written on January 14, 2017
It replaced my front sight block with this so i could run a free float hand guard, it was simple to change and works great,excellent quality, fit and finish was perfect. I went ahead and dimpled my barrel too, just so it couldn't move, I'm completely satisfied with it and with Optics Planet
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Dave,
from KY, United States
Written on August 4, 2016
Relieved gas block in timely manner and it works flawlessly. Would recommend this product to anyone. It installed perfect slipped right over the barre like it should have. The rails workes like they should as well. The rails where the right size everything I tried for perfectly on the rail. If your in the market for this type of gas block you can't go wrong with this purchase.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?