Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Has to have anti walk pins to properly install
Trigger has a great feel and break. But...you have to buy anti walk pins to properly install. Trigger pins walk. If you tighten the screws designed to prevent this, the trigger body rises against the safety selector switch and it won’t operate.
Most Helpful Negative Review
Good Trigger, Terrible Instructions
The included instructions make no mention of the base plate that you need to install under the trigger to protect your receiver from damage by the set screws. Also, there is zero mention of the trigger bridge that must be installed and must be oriented properly. I did find updated instructions onlin...
Read More...
Read More...
Great trigger, moderately easy install
This trigger 100% fits in the Sig MPX which I had had the unfortunate luck of purchasing other triggers that did not work. It's quick and easy to install if you have the right tools, the time, and the instructions. Although the instructions that came with the trigger are not extremely detailed, it still gave enough to guide me to installing it with only one minor issue (my error, not the instructions or the trigger). I recommend this is probably the best trigger out there. Smooth, easy to pull, and overall a great upgrade to an already great gun.
Would recommend: Yes
Excellent trigger
The trigger was crisp and quick return of engagement. I would highly recommend this trigger for any MPX rifles.
Would recommend: Yes
works like a charm
Had a defective one from sig it self, but it seems like the one i got is locked into place and been abused no signs of breakage as of just yet.
Would recommend: Yes
Easy installition and disregard walk out pins.
This is my first time putting in a drop in trigger. While the directions were handy, YouTube it for play by play instructions for those that need a visual reference like me. Only issue I ran into was finding a punch that was small enough to knock the roll pin out for the ambi safety.
As far as the reviews on the pins walking out I feel like people aren’t willing to tighten the screws down all the way. The springs are kind of in the way to access the Allen screw ports and you will need to use a small flathead to move them out of the way. Very, very simplistic. I would recommend anyone with an MPX that is a novice, like myself, to upgrade the trigger before literally anything else on this platform.
As far as the reviews on the pins walking out I feel like people aren’t willing to tighten the screws down all the way. The springs are kind of in the way to access the Allen screw ports and you will need to use a small flathead to move them out of the way. Very, very simplistic. I would recommend anyone with an MPX that is a novice, like myself, to upgrade the trigger before literally anything else on this platform.
Would recommend: Yes
Purchased for replacement of terrible trigger pull
Sig MPX Copperhead has not been shot after installing, but reduced trigger pull and reset is crisp and short: Pull weight dropped from 9.9 lbs to 4.3 lbs and not oiled .
Would recommend: Yes
Great trigger.
Over all its a great trigger, but the instructions to install it were very vague. If you know a think or two about AR platform you should be fine.
Pros:
- Crisp & clean break when firing
Cons:
- Instalation
- Bad instructions
Best Used for:
- rifle
Would recommend: Yes
MPX Timney Trigger
Ordered one for my MPX. Light years better than the standard trigger that SIG provided with the MPX. Has my gunsmith install although in retrospect it would be an easy do-it-yourself job. Crisp and smooth.
Would recommend: Yes
Solid trigger - get anti walk pins
This is in my mpx k and it's titties but the pins didn't stay and needed to wait to use until I had anti walk pins installed
Pros:
- Works 10/10
Cons:
- Needed a part
Would recommend: Yes
Great single stage trigger
I love this trigger. It made my MPX shootable and a great great option to shoot again. The stock trigger for the MPX hard and effected my on target aim. This trigger made shooting the mpx fun again. I found the new Timney trigger to be smooth And easy to install
Pros:
- Easy to install, smooth, great pull weight
Cons:
- Want a 2 stage option
Would recommend: Yes
Easy install, perfect fit
Put this trigger in my Sig Copperhead, pulled out old trigger, dropped this one in, put in the pins and tightened two screws, that’s it, 3.5lbs. I would recommend putting these in all guns they will fit. I read a review from a guy saying the pins fall out, yes they will until you tighten the screws that are in the trigger box, they put tension on the pins and I had no issues
Pros:
- EASY INSTALL
Cons:
- None except price but worth it
Would recommend: Yes
3 of 4 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?