by
Matt,
Verified Owner
from WA, United States
Written on December 9, 2025
Besides the bolt pattern it’s a great red dot. Usual Trijicon quality. You’ll need an adapter plate to bolt to pistol
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Mac,
Verified Owner
from CA, United States
Written on November 2, 2025
its made by trijicon so the name speaks for itself, its bright, tough, and does the job great... the only reason for the 4/5 is the mount support kinda sucks. it is NOT the RMR footprint so its not easily/ readily available on anything and if you dont want to mill your slide you have to use adapter plates. i hated the adapter plate on my sig so i ended up getting the trijy lower 1/3 mount and put it on a pdw, it works great for that but i did spend a few hundred bucks on different mounts before i decided to put it on the rifle.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Philip Gaitan,
Verified Owner
from FL, United States
Written on April 30, 2025
This Is a wonderful red dot worth every penny use your Optics Planet Bucks and get this perfect fit for your P365 Killer Innovations Slide!
Pros:
- Perfect Fit
- American made
- Excellent build quality
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Thomas Seals,
Verified Owner
from MN, United States
Written on April 20, 2025
Perfect fit for my everyday carry and spot on accuracy.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
CN,
Verified Owner
from NC, United States
Written on February 11, 2025
Perfect size for a concealed carry gun. Very satisfied with the quality of this red dot and will purchase another if needed before another brand
Pros:
- High quality, durability and footprint
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Jef Ura,
from CA, United States
Written on February 10, 2025
I put this RMRcc on my HK VP9, the only issue I had was finding the plate which was another $50.00 aside from that the installation was a breeze. The battery is bottom cased so changing out the battery will take 2 screws to remove once installed. The red dot on the Trijicon was tightly dialed in as I shot 50 rounds with my wife. The grouping was very tight and accurate. The optic lense of 3 MOA with the correct eye relief distance gives a nice little scope zoom. And brightening the red dot option is nice as well. The only con I would say is the turn off is a bit rigid having to push both buttons on each side for 3 seconds is kind of a pain. But overall made my shot groupings better . Good investment for me.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Mark,
from WA, United States
Written on January 14, 2025
Mounted on Glock 43 custom slide, fit is excellent.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Simplybeef,
Verified Owner
from TX, United States
Written on January 4, 2025
This is my second RMRcc and i love them. Instant upgrade on grouping once you get used to aiming with a red dot..
Use both eyes open
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
L-Man,
Verified Owner
from TX, United States
Written on September 25, 2024
I'm glad I spent the extra money on the Trijicon. It's sleek, works very well, and is accurate. I put this on my CC gun, a Glcok 43X, and it fits nicely. I got my slide cut explicitly for this (Wager Machine Works; also great). I highly recommend it.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Ryno,
Verified Owner
from UT, United States
Written on September 10, 2024
Glad I went with the trijicon mini. She you can get a holosun, or a vortex mini for much cheaper (half the price) but with trijicon you never have to worry about how well it will hold up. And you'll never have to be embarrassed about it. ;)
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?