Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Troy Reach Around Bolt assist
Great machining. Plenty of room in trigger guard after installation. Minus one star because you can over tighten small hex screw and jump the threads. Go easy on it, tight is tight, too tight is stripped. Use the short end of the Allen key.
Troy bolt Release
I have a couple of these and really like the function and fit. If installed properly there is no slop in any direction that's not already in existing release. This Troy bolt release makes a mag change to full battery quick for me.
Would recommend: Yes
Troy industries ambi bolt catch and release
Fit perfect on the 11.5” 556 PSA Sabre bolt release. Comparable to magpul bad lever. Enables you to lock the bolt back when pressing up onto the lever and also release the locked bolt by depressing same lever. Textured well for grip. It could fit tighter along the body of the receiver but it’s understandable given every receiver is contoured proprietarily. Will only fit the standard size/shaped bolt release given the recessed areas shape. I have no problem recommending to anyone who has the standard profile bolt release.
Would recommend: Yes
2 of 2 found the following review helpful.
Must have BAD lever
If you run a BAD lever this is the best one to have. It cradles a mil spec lever perfectly and with the set screw there's no wobble. Fits perfectly in the trigger space and I'm able to shoot with gloves with no interference. You do have to have a mil spec bolt release. I have these on Almost all of my rifles.
Pros:
- None
Cons:
- A little pricey
Best Used for:
- Clearing malfunctions
Would recommend: Yes
Ambidextrous AR 15 Bolt Release Wanna Be
This add-on lever is a good idea, but design and follow through are poor.
1. There are no instructions (except some weak YouTube videos) with the purchase.
2. The lever does not tighten securely to the rifle's bolt release.
3. In fact, plan on using Loctite to keep the set screw in the lever.
4. Even then, plan on the add-on to continue to "wiggle" once mounted.
5. I would have looked at the Magpul option had I known the issues.
1. There are no instructions (except some weak YouTube videos) with the purchase.
2. The lever does not tighten securely to the rifle's bolt release.
3. In fact, plan on using Loctite to keep the set screw in the lever.
4. Even then, plan on the add-on to continue to "wiggle" once mounted.
5. I would have looked at the Magpul option had I known the issues.
Would recommend: No
0 of 1 found the following review helpful.
Go with Magpul Bad Lever
I like the design as far as the appearance, but the set screw and how it locks ups to the bolt catch is weak. After many Magpuls I decided to switch it up, and it was a mistake. Stick to the Magpul Bad Lever, its hardware is stronger, it locks onto the catch better. The magpul is the better of the two. I'm honestly very disappointed in this product. Set screw stripped out, and I was barely putting any torque on it at all. Magpuls design is much better...stronger
Pros:
- Looks good
Cons:
- Bad design, weak lock on and hardware
Best Used for:
- Airsoft
Would recommend: No
0 of 2 found the following review helpful.
Great alternative to the bad lever
I bought to try out and I’m not disappointed in the Troy ambi bolt release. I expected good quality from Troy but wanted to compare it to the bad lever. I will not be buying a second bad lever and will use the Troy.
Would recommend: Yes
4 of 4 found the following review helpful.
Works as advertised.
Works as advertised. Fits on bolt release with no issues. Allows me to release bolt with trigger finger. Quality material and easy to install. Good price point. Running palmetto bolt release and this part fits fine.
Would recommend: Yes
1 of 1 found the following review helpful.
troy ambidextrous bolt release
I would recommend buying from opticsplanet very fast shipping even during this covid. I would also recommend buy the Troy ambidextrous bolt release easy install unlike my magpul bolt release this one is metal.
Would recommend: Yes
0 of 1 found the following review helpful.
Troy Ambi Bolt Release
This is a great product. Shaves time off of magazine changes. Combine this with their mag release and you will have a solid setup for a lefty. It is designed and placed so it does not affect manipulation of the trigger in the trigger well. This will be a part of all of my builds.
Best Used for:
- Faster Magazine changes
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?