Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Glock 19 slide
Installed without any issues. Very well made. Also very nice that it comes with channel liner installed. Optic cut and screw line up was perfect as well. Serrations are better than oem slide but not too aggressive for EDC.
Most Helpful Negative Review
Limited to front suppressor sight choices
Purchased only to find out that every suppressor height sight other than trijicon suppressor sights WILL OVERLAP the top window port. The trijicon front suppressor sight will BARELY clear the top front window. I see some aftermarket regular height sights such as hi viz overlapping as well....I recom...
Read More...
Read More...
Trybe defense slide
This thing is horrible it looks beautiful but it doesn't work once it's about halfway on the frame it binds up even without a barrel or spring it locks up and sticks to the rear and you have to tap it to get it to come off The Machinist should be fired
Pros:
- Looks nice
Cons:
- doesn't work
Best Used for:
- as a paperweight
Would recommend: No
1 of 1 found the following review helpful.
Great price - wish it fit properly.
The Good:
-Super cheap price from a reputable name.
-Fits Glock OEM and AM Gen 5 internals like a glove.
-Nice finish and external machining
The NOT So Good:
-Trybe does not offer a fit optics mount cover plate- they only offer mounting screws.
-This is the BIG issue! - The slide / frame rail guide channels are off if a few ways....WAY TOO HARD TO CYCLE THIS SLIDE. This cycles like steel dragged / grinding over concrete throughout the entire length of the cycle. A quick pass with calipers show it is just a bit too narrow.
I have tried this slide on 3 different frames ( 2x OEM Glock Gen 5's and 1 Nomad hybrid Gen 4/5)
For the price you could spend some time and or money fixing the issues. but I don't believe it's worth it and I do not believe it would cycle reliably if at all.
I would NOT buy this again and will not recommend.
-Super cheap price from a reputable name.
-Fits Glock OEM and AM Gen 5 internals like a glove.
-Nice finish and external machining
The NOT So Good:
-Trybe does not offer a fit optics mount cover plate- they only offer mounting screws.
-This is the BIG issue! - The slide / frame rail guide channels are off if a few ways....WAY TOO HARD TO CYCLE THIS SLIDE. This cycles like steel dragged / grinding over concrete throughout the entire length of the cycle. A quick pass with calipers show it is just a bit too narrow.
I have tried this slide on 3 different frames ( 2x OEM Glock Gen 5's and 1 Nomad hybrid Gen 4/5)
For the price you could spend some time and or money fixing the issues. but I don't believe it's worth it and I do not believe it would cycle reliably if at all.
I would NOT buy this again and will not recommend.
Pros:
- None
Cons:
- out of spec
- poor fit
- Will not cycle
Would recommend: No
Poor finish. Poor fitment
After lots of fitment was able to get barrle into battery. Small chip on front of slide near recoil spring.
Best Used for:
- range toy
Would recommend: No
Coating causing bad fitment of barrel.
When I first put the slide together I couldn't get the barrel to sit into battery. The costing was too thick. After calming down I got to checking clearances and saw where the slide wasnt letting the barrel fit and eqs able to make clearance for it. Being a final sale im screwd but it seems to function now even tho now my coating is messed up.
Pros:
- Cheap
Cons:
- bad coating
- Can't trust for carry.
Best Used for:
- Range.
Would recommend: No
shockingly happy with the results
I went into this purchase with high hopes and it didn't disappoint. It shipped fast and was a great deal, making it an easy way to kick off a build. I’m running a Holosun 507c and the fit is perfect; while I haven't added irons yet, the tolerances are impressive. My only minor gripe is that I wish the logo was a bit smaller and more subtle, but that’s purely an aesthetic preference.
Performance-wise, it cycles flawlessly. The reduced weight from the window cuts perfectly offsets the weight of the optic, meaning the OEM recoil spring still works exactly as it should without feeling sluggish. Just make sure to get a good lubricant on everything before the install. Overall, this exceeded my expectations and is a solid choice for anyone looking to upgrade without sacrificing reliability.
Performance-wise, it cycles flawlessly. The reduced weight from the window cuts perfectly offsets the weight of the optic, meaning the OEM recoil spring still works exactly as it should without feeling sluggish. Just make sure to get a good lubricant on everything before the install. Overall, this exceeded my expectations and is a solid choice for anyone looking to upgrade without sacrificing reliability.
Pros:
- color and finish
- fast instalation
- Looks great , Easy installation
- Fitment and design
Cons:
- None
Best Used for:
- Glock 19 gen 5
Would recommend: Yes
Great high-quality stainless steel slide.
Definitely would recommend just be sure to really do your research. I ended up ordering three separate slides because I didn’t research which one was right for my gun. The problem I had is I have a Glock 45 but I didn’t know is the Glock 45 is a GEN five Glock 19. Slide. So I ordered a GEN two then a GEN three and a GEN four. I received the GEN two slide and figured out it didn’t fit on my gun so I did more research. But not before I decided to order the GEN three and four to see if they would fit. But all in all very high-quality I ended up putting the enclosed vortex venom red dot on mine and the fit was perfect. And if you’re wondering the cut for the slide for the enclosed vortex venom red dot is the Delta point pro
Would recommend: Yes
TRYBE GLOCK 19 SLIDE
TRYBE slide, version 1, for Glock 19 -- cut-out foot print for the Vortex Viper red dot (6 MOA) was too small/tight for the Viper. Had to remove a slight amount of the cerekote finish to fit the red dot onto the slide. The slide cover plate and screws shown in the picture of the slide were not included. The screws included with the Viper red dot were too short so it was necessary to obtain longer screws.
Other than that, the slide/gun work just fine. Now.
bbstacker1
Other than that, the slide/gun work just fine. Now.
bbstacker1
Pros:
- Works good after installation
Cons:
- Was designed to be a drop-in part but is not.
Best Used for:
- Short to medium range competition.
Would recommend: No
Looks great
Went on my Dagger no problem. Looks great with my chameleon barrel and best of all it comes with the liner!
Would recommend: Yes
No cover plate, no biggie
Perfect fit and looks great, be advised it does not come with a cover plate and screws. Might be a deal breaker for some.
Would recommend: Yes
2 of 2 found the following review helpful.
Striker channel or firing pin hole out of spec.
Multiple light primer strikes and found the culprits to either be an out of spec channel or firing pin hole. When the plunger is pressed down it takes effort for the firing pin to pall when the slide in set vertical for testing purposes. Ive tested my other clones and glocks which did not have that issue. Ill continue to shoot it a little more maybe itll resolve itself. Got the wrong cut but was on sale so not a complete loss. Wouldnt trust it for defensive use.
Pros:
- Price
Cons:
- Quality Control
Best Used for:
- range & target shooting
Would recommend: No
2 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?