Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Nice Product
Got this for my Sig with Faxon treaded barrel. Looks and works great on Sig pro cut slide. Easy install and removal for gun take down for cleaning after use. Received my normal great service and fast shipping from OpticsPlanet.
Most Helpful Negative Review
not impressed
I contacted tyrant about my issues they didn't seem interested in fixing them. I installed exactly like their video said. First time out the Orings were ripped and the silver finish on the compensator had flaked off. Tyrant told me the orings should last 6-800 rds I did 120rds during a hour long ra...
Read More...
Read More...
Nice Comp����������
My p365x shoots soooo much flatter since I installed now I’m waiting on my intellifire trigger to be shipped so I can test it out next
Would recommend: Yes
Didn't work for my P365
Purchased this item with great anticipation and excitement. Installed on my P365 that had been previously zeroed with my red dot optic. I was deeply disappointed when I discovered that having this compensator on my P365 cause the shots to vary off by a range of 3-9 inches when shooting a target of 35 feet. Yes, I went through several elimination steps/process to find out what was causing the strike of the rounds to go off zero. After over an hour of going through the process of elimination, it became clear that the compensator was the cause of the variance of the rounds hitting sporadically 3-9 inches off the target. It didn't work for me.
Pros:
- Looks great and fits beautifully on the P365
Cons:
- It didn't work for my P365 barrel
Would recommend: No
1 of 1 found the following review helpful.
Good recoil control
purchased for my P365 and has noticeable recoil control. Tighter grouping and better accuracy overall.
Pros:
- accuracy
- Recoil
Cons:
- None
Would recommend: Yes
Doesnt Fit
I bought this for my Sig p320 xcompact RXP with a Sig 1/2x28 RH thread pitch barrel that I bought directly from Sig. It does not fit my barrel at all. When I placed the compensator on the barrel, it left a gap between the comp and the end of the barrel. I next tried to screw it in, but it too far out to hit the threaded barrel. Next, I tried to just put the compensator screw in by itself and found that the thread is not compatible. Neither the fit nor the thread are compatible.
Pros:
- None
Cons:
- Doesnt fit p320 Sig OEM threaded barrel
Would recommend: No
6 of 7 found the following review helpful.
Junk piece of Trash. That's being polite!
Ok, I installed as directed on a Sig P356 with a True Precision threaded barrel. Ran 4 mags through it. Blew the O rings out both front and back. Failures to eject, stovepipes and failures to feed. Im talking on almost every shot. Ended up messing up the threads on my new barrel. The Comp finish was burnt off. Just running Syntec and FMJ range ammunition, nothing unusual and not +p. Highly pissed off. This freaking thing is dangerous.
Pros:
- Absolutely no pros
Cons:
- Everything about this is a con...that's the problem.
Best Used for:
- To help fill a trash bag
Would recommend: No
12 of 17 found the following review helpful.
Don’t buy, this thing is a overpriced scam
I got one of these for the Sig sauer p365. Right after 2 mags the o ring snapped and it caused multiple malfunctions. It’s sincerely an overpriced piece of metal scrap. More dangerous than helpful. DO NOT RECOMMEND. Go with something cheaper that actually works like the mini comp from Griffin Armament.
Pros:
- Looks cool
Cons:
- Barely works, causes feeding issues consistently, it is definitely not meant to last long.
Best Used for:
- Paper weight, temporary intimidation
Would recommend: No
11 of 13 found the following review helpful.
Bad product
Put on my p365 didn't over tighten like instructed and the o rings still broke after firing one clip went through my o rings on the first range trip it reduced the recoil but it caused failure to feeds would not recommend
Would recommend: No
13 of 15 found the following review helpful.
Materials are cheap.
Ordered this and returned it. And honestly looked like airsoft toy in build quality. Going with Parker Mountain machine next time. I'm sure that it works I have seen several videos that show the compensator is effective and itself and I've heard it's easy to install, but I just can't get over the fact that the materials look so cheap.
Would recommend: No
9 of 14 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?