Load inicator issue - Viridian Weapon Technologies RFX-1 for Ruger LCP Max 16x15mm Reflex Red Dot Sight

Before purchase warning. If you LCP Max comes with the load indicator you will need to modify it to make this optic work as the optic sits 1/4 inch past the pivot point of the indicator. Ruger does sell indicators for $4 each plus tax so buy two. I ground down the indicator to make the optic work while a cartridge was in battery. Hopefully Viridian comes up with a change as it is the optics battery that sits under causing the indicator not to let the round come into battery. #2 - the optic is great up til the point where the up/down range is basically bottomed out in order to center the sight to best range in at 21ft. #3 - keep spare batteries. If you carry, the optic is going to stay on all the time. It has a 2minute idle shutoff. If you move in any direction(like constant on the go) battery life will diminish substancially. Then youre replacing batteries more than you think. There is a torq spec for the screws recommended. 15in pounds. Does not seem tight enough IMO.