A nice complete kit - Weaver Scope Mounting Kit - Standard/Deluxe

This kit will get you through the process of mounting your scope rings to your weapon with the included DVD. Just follow the instructions step by step and you really can't go wrong. Mind you ,the lapping compound is messy so be sure to cover the chamber area with a rag to keep the stuff from getting in there. Also, take your time ! Your going to have to check your progress with the lapping compound which will require you to clean the rings,both top and bottom , then remount and check with the ring alignment rods. Be fore warned, this is not a 5 minute job….to do it right it's gonna require you to remove and remount the rings 4 or maybe 5 times to get it all dialed in . Use a powered fastener driver to remove your ring fasteners and have a plastic bin with some SIMPLE GREEN cleaning solution handy for the cleaning segments.Have some Q-tips ready to clean those fastening holes. Its' a lapping compound right ? Running those fasteners in and out without cleaning will get 'em loose to the point that they won't tighten any more.This is especially important with the Alum. rings. Rubber gloves might be a good idea. When marking your ring parts with tape, use a permanent marker or they may be washed off. Aluminum Rings ? Don't tighten them beyond 10-15 inch lbs. Steel ones will be good at 15-20 inch lbs. Stick with this info and you'll be good.This is a gunsmiths job but gunsmithing isn't rocket science and you can do the job with this kit.