Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Feral Husband's Review of Wheeler Engineering FAT Wrench AutoTorque
Purchased and ran a gauge R&R to verify accuracy. This driver overshot the torque value on every target number by up to 105%.
We targeted 10, 20, 30, 40 in*lbs. We performed 10 tests at each value with 2 different users. So 20 tests per targeted value.
We used a calibrated torque tester to collect data. At 20 in-lbs we had 6 instances where the torque readings were above 39 in-lbs.
At no point did this undertorque the set value.
We targeted 10, 20, 30, 40 in*lbs. We performed 10 tests at each value with 2 different users. So 20 tests per targeted value.
We used a calibrated torque tester to collect data. At 20 in-lbs we had 6 instances where the torque readings were above 39 in-lbs.
At no point did this undertorque the set value.
Pros:
- It's cheap
Cons:
- It's cheap
Best Used for:
- Paperweight, lawn dart, conversational piece about how good it would be if it worked.
Would Recommend:
No
1 of 1
found the following review helpful.