Best anti-walk pin set on the market - Wilson Combat Anti-Walk Hammer/Trigger Set Pins

These are by far my favorite anti-walk pin set on the market and the only set of pins I will be going with for all future builds - previously used JPs anti-walk pins for trigger installs. I liked them so much I even bought an extra set to replace a house brand set of traditional pins I used that did not live up to their rep (marred very easily). If you are building a traditional trigger setup especially one you can tinker with, as in manipulate the reset and overtravel, like my preferred jp enterprises triggers (https://www.opticsplanet.com/jp-enterprises-ar-15-154in-small-pin-trigger-kit.html) I think you need to go no further than these as you will not get a better product. My two favorite things about these: 1. The pins have recesses for the trigger, hammer, and j springs (or JP's speed springs if you have their fast hammer) that provide additional locking like a traditional pin set. This also allows you to not have to remove any of the springs that may be installed on the hammer like the j spring as is preferred if you use pins without the recesses. 2. The guiding angled screw pieces are extremely helpful in installing the pins while setting up a trigger as they slide the springs easily out of the way and guide the pins through the receiver pin holes (very helpful for tough j-springs even when using a guide pin and some extra safety against marring receiver pin holes). I know it seems like not a big deal but if you are a perfectionist and want to make sure your settings are perfect this is a saving grace in re-assembly and assembly of a traditional trigger. Lastly these pins just fit...no extra material not allowing my screws to tighten up against the lower. And the price for what they are going for now is absolutely ridiculous I would pay more for these than any other set available.