Your Browser is OutdatedOriginal parts from beretta 92 fs don't fit - Wilson Combat Custom Carry Lo-Profile Single Lever Safety
Compare (0)
1 item has been added
Add at least two items to compare
Lok's Review of Wilson Combat Custom Carry Lo-Profile Single Lever Safety
The safety does not come with any detents or springs.
I took out my old safety and salvaged the 2 detents with their corresponding springs and the firing pin safety.
I discovered that the larger of the two detents, the one closest to the left safety lever does not fit the hole in the Wilson safety.
The hole is stepped, a larger hole leads to a smaller hole at the other end, and it's this smaller diameter hole that is out of tolerance and was drilled too small.
Therefore, the stepped detent does not fit fully in the hole, rendering the safety unusable.
The tolerance on the firing pin hole is also not quite right resulting in a very tight fit.
Had to return the product.
I took out my old safety and salvaged the 2 detents with their corresponding springs and the firing pin safety.
I discovered that the larger of the two detents, the one closest to the left safety lever does not fit the hole in the Wilson safety.
The hole is stepped, a larger hole leads to a smaller hole at the other end, and it's this smaller diameter hole that is out of tolerance and was drilled too small.
Therefore, the stepped detent does not fit fully in the hole, rendering the safety unusable.
The tolerance on the firing pin hole is also not quite right resulting in a very tight fit.
Had to return the product.
Pros:
- nicely made
Cons:
- does not fit detent
Would Recommend:
No