Cross Armory Pin Pal Pin Replacements Up to 26% Off — 2 models

The Cross Armory PIN PAL is designed to reduce or eliminate that wear that will be caused by the repeated opening and closing of the upper and lower receivers, as now required by so-called assault weapon laws in states like California, New York, New Jersey and other states. The gun manufacturer never intended that the aluminum receivers should be frequently pivoted on a steel front takedown pin. This action will cause accelerated wear on the through-hole in the receiver causing the hole to expand and elongate. Fitment of the upper and lower receivers will become sloppy, making your weapon less dependable. Replacement of an upper receiver is an expensive proposition.

PIN PAL includes a pin, a locking nut and a MIL-SPEC captive bearing. The pin and nut are machined from 4140 Ordnance Steel for extreme durability. The custom machining of the assembly allows PIN PAL to be built to very tight tolerances.

The MIL-SPEC captive bearing is made from an increase iron content porous metal that is stronger and more resistant to shock loads than standard oil-embedded bearings. Start-up friction (e.g. separating the receivers) causes the captive bearing to release a thin layer of oil on the bearings surface.

PIN PAL is a simple and inexpensive solution to eliminate the wear of a standard steel takedown pin on the softer aluminum upper receiver. Its bad enough that legal gun owners have to separate their receivers in order to reload. It will be far worse if an upper receiver has to be replaced as a result.

Specifications for Cross Armory Pin Pal Pin Replacements:

Features of Cross Armory Pin Pal Pin Replacements

• Front takedown pin replacement in heavily regulated states AR-10/15 owners are now opening their receivers with great frequency. A more durable pin system is needed to prevent undue wear on the forward pivot point the upper receivers take down pin hole
• Lubricated captive bearing reduces wear standard steel front takedown pins bear directly on the holes in the aluminum receivers. PIN PAL bears on a brass alloy bearing
• The bearing will fit into any upper receiver without special tools
• Wont permanently alter your weapon If you decide to go with a different setup on your weapon, PIN PAL is easily removed and returned to the manufacturers factory set-up
• 4140 ordnance steel our front takedown pin is machined from 4140 steel with a melonite hard-coating for durability

Package Contents:

• Cross Armory Pin Pal Pin Replacements

The Cross Armory CRPP Pin Pal AR-15 Pin Replacement 223 Remington/5.56 NATO AR Platf is a quality addition to the Cross Armory lineup. For more great deals on AR15 Takedown & Pivot Pins by Cross Armory, please browse our Cross Armory Gun Parts page.