Your Browser is Outdated
1 of 1 images
Phase 5 Tactical AR-15/M16 Pistol Pigtail Gas Tube For 7.5 Inch Barrels Only
Tap Tap to Zoom
Questions & Answers
Customer Reviews
Helpful Positive Review
I used this on my 458 socom SBR with a 10.5" barrel. This change the recoil impulse and allowed me to dial in my ejection pattern. The extra burn time with this tube makes a big difference for such a short barrel.
3/3 found this helpful
Helpful Positive Review
It solved the short barrel gas tube issues, I did have to "tweek" it a bit so ends of tubs were where they needed to be. All good.
.................................................................................................
6/9 found this helpful
Helpful Positive Review
Update - Jan 2022, still going good in my AR. Stopped the 7.5 inch barrels "over gassing" it had at the time, and cycle timing is now fine with its install. Its been a fine product for me, I have seen others say otherwise - can't speak for them, I kn...
Read More...
5/5 found this helpful
Read More...
Helpful Negative Review
This pigtail will NOT work with 90% of hand rails out in the market. The outside diameter of the pigtail is too large to fit in the inside diameter of most any railed hand guards. It simply won't fit. Only round,or non railed hand guards have a big e...
Read More...
5/17 found this helpful
Read More...
Most Recent Reviews
I couldnt be more satisfied with this gas tube! I put it on a Alpha Shooting Sports .223 Wylde, 7.5 inch barrel. I slid that into a Vltor VIS-1 Monolithic upper. Yes, it was a tight fit, & yes, it needed a bit of encouragement to fit. A good pair of ...
Read More...
Read More...
- Color:
- Silver
- Gun Make:
- AR Platform
- Gun Model:
- AR-15
Code: 1U8-RGT-PIGTAIL
MPN: PIGTAIL
UPC: 813318020437
List: $90.99Save 29%
$65.00
Made in USA
Help support American manufacturing! Marked models of this product have gone through rigorous review and been certified by the manufacturer as Made in the USA.
Product Info for Phase 5 Tactical AR-15/M16 Pistol Pigtail Gas Tube For 7.5 Inch Barrels Only
The pigtail gas tube was designed to solve timing problems for over-gassed 7.5in AR pistols. The pigtail design causes the tube to simulate a more standard cycle time and helps remedy timing problems without patchwork like a heavier buffer, etc. This allows the shooter or builder to use standard Mil-Spec carbine parts for better reliability. Fits all barrels using a pistol length gas system with an outer diameter at or below 1in. The diameter of the outside of the pigtail gas tube loops range from 1.46in - 1.56in. For best fit, the minimum inner diameter of a quadrail or handguard should be 1.6in.
WARNING:
California`s Proposition 65
Specifications for Phase 5 Tactical AR-15/M16 Pistol Pigtail Gas Tube For 7.5 Inch Barrels Only:
| Mfg Item Num: | PIGTAIL |
| Type: | ACCESSORIES - GUN ACCESSORIES - GUN PARTS |
| AR-15 Parts: | AR-15 Parts |
| made in specialized factories: | made in specialized factories |
| Tactica: | Tactical |
| Master Model Header: | AR-15/M16 Pistol Pigtail Gas Tube |
Features of Phase 5 Tactical AR-15/M16 Pistol Pigtail Gas Tube For 7.5 Inch Barrels Only:
- Fits all barrels using a pistol length gas system with an outer diameter at or below 1.
- Unfortunately the Pigtail gas tube will not fit correctly under our LPSN (Lo-Pro Slope Nose Quad Rail)
- The diameter of the outside of the pigtail gas tube loops range from 1.46" - 1.56"
- For best fit
- the minimum inner diameter of a quad rail or hand guard should be 1.65"
Package Contents:
- Phase 5 Tactical AR-15/M16 Pistol Pigtail Gas Tube For 7.5 Inch Barrels Only
Phase 5 Tactical AR-15/M16 Pistol Pigtail Gas Tube For 7.5 Inch Barrels Only Orderable Models
List of Orderable Models
- Phase 5 Tactical AR-15/M16 Pistol Pigtail Gas Tube For 7.5 Inch Barrels Only , MPN: PIGTAIL , UPC: 813318020437 , Code: 1U8-RGT-PIGTAIL
Compare (0)
1 item has been added
Add at least two items to compare