Please email us at techsales@opticsplanet.com so we can further answer your question.
Burris is based in the U.S.
According to Burris every lens is fully multicoated.
This model of the Burris Fullfield E1 3-9x40mm Rifle Scope 1in Tube Second Focal Plane is non illuminated and does not use a battery. The illuminated models use a battery but are no longer available.
The Burris Fullfield E1 3-9x40 mm Rifle Scope is 12.2" in overall length. For the length from the rear of the scope to the start of the bell of the objective lens I recommend contacting Burris for that information.
The Burris Fullfield E1 3-9x40 mm Rifle Scope is a variable power scope. The magnification range is 3-9x and it has a second focal plane reticle. If you are wanting a fixed magnification scope the model at the link below might work for you depending on what magnification you want the scope to be.
https://www.opticsplanet.com/burris-2-75x-heavy-plex-mat-scout-scopes.html
Mounting the Burris Fullfield E1 3-9x40 mm Rifle Scope to the forward picatinny rail on the Springfield M1A Scout Squad will most likely prevent from attaining proper eye relief. I recommend using a scope with a long eye relief like the one at the link below.
https://www.opticsplanet.com/burris-2-75x-heavy-plex-mat-scout-scopes.html
Yes. The Burris Fullfield E1 3-9x40 mm Rifle Scope will work well with a .308 caliber rifle. I would recommend the Ballistic Plex E1 reticle (MPN:200320) which features hash marks designed for dead on aiming out to 500 yards. It also features Hold Assist Dots that represent hold off for a 10 m.p.h. crosswind (+/- 1.5 in. at 400 yds.)
The Burris Fullfield E1 3-9x40 mm Rifle Scope will mount to a Juggernaut AR10 but it will need to be mounted to the picatinny rail on top of the receiver of that rifle. I recommend using a 1" diameter cantilever mount. The 1" Warne Gen 2 Extended Skeletonized MSR Mounts at the link below will work with this scope.
https://www.opticsplanet.com/warne-gen-2-extended-skeletonized-msr-mount.html?_iv_tube-diameter=1-in
Yes with the proper mounting equipment.