The 20" 10200-HYR is chrome lined. None of the stainless barrels have chrome lining.
The Parkerized Criterion Barrels AR-10 Rifle Length Gas System Barrels are chrome lined. The Stainless Steel Criterion Barrels AR-10 Rifle Length Gas System Barrels are not chrome lined.
Yes, the Criterion Barrels AR-10 Rifle Length Gas System Barrel (MPN:10180-HYR) is chrome-lined.
These Criterion Barrels AR-10 Rifle Length Gas System Barrels are DPMS Gen 1 Pattern and will most likely not work in a DPMS Gen 2 pattern rifle.
The manufacturer states that the Criterion Barrels AR-10 Rifle Length Gas System Barrel uses a .750" gas block. So I recommend emailing us at techsales@opticsplanet.com so we can help figure out the correct gas block you need.
The Criterion Barrels AR-10 Rifle Length Gas System Barrels vary in weight depending on caliber and length. The .308 Criterion Barrels AR-10 Rifle Length Gas System Barrels are 2.5lbs for the 16", 2.65lbs for the 18" and 2.9lbs for the 20". For the 6.5 Creedmoor Criterion Barrels AR-10 Rifle Length Gas System Barrels the weights are 2.60lbs for the 16" 2.75lbs for the 18" and 2.95lbs for the 20".
The Criterion Barrels AR-10 barrels that are chambered in .308 can use .308 or 7.62x51, . 308 is actually a bit higher chamber pressure than 7.62x51, so the 7.62 is safe from a . 308 but not necessarily the other way around.
Correct. The Criterion AR-10 Barrels can be purchased in 6.5 Creedmoor or .308.
No. The Criterion Barrels are sold with only the barrel alone.
The Criterion Barrel 16", 18", and 20" barrels all use a .750 diameter gas block and the 22" barrels use a .875 diameter gas block.