Your Browser is Outdated
It is listed to fit the Shield Plus and 2.0. It does not fit the EZ model.
GX4's have Glock dovetail/sight cuts both front and rear, the rear being Slimline width.
I have not received first hand or customer reviews of a Glock FT Front Bullseye fitting on a GX4. Only thing I would be worried about is clearance on the slide (i.e. "step downs" into the front sight area that would tilt up the sight body) which the FT's really need a flush straight top edge of the slide to work well. Other worry is the fitment of our stud into the cut-out on the slide itself. There may be a little "play" that needs to be shimmed up or Loctite used.
The current iteration of 'rear dovetail filler' for the Glock FT Front is meant for Standard width (not slimline) Glock so that will be an issue on the GX4 which the slide is only wide enough for slimline rear widths. This will soon be remedied where both sizes of dovetail fillers will be included in the package.
The Meprolight FT Bullseye Tritium Self-Illuminated Front Pistol Night Sight for the VP9 is compatible with the P2000. However, the rear sight blank is NOT compatible with the P2000. You would need to remove your rear sight in order for this sight to function as intended with your P2000. Essentially, it is only listed as not compatible with the P2000 because of the rear blank sight.
The Meprolight FT Bullseye Tritium Self-Illuminated Front Pistol Night Sight was designed to be used without the rear sight. I would recommend using the included rear sight delete in order to allow for proper functionality of this sight set.
As of right now, the rear dovetail filler is specially made for standard size Glocks where it will be a flush fit with the profile of the slide. Whereas if you put this on a slimline you would have overhang off the sides. We are working on either; including the slimline rear dovetail filler in the near future in this SKU or just making a 2nd SKU that has the FT Front + Slimline specific dovetail filler.
The Meprolight FT Bullseye Tritium Self-Illuminated Front Pistol Night Sight (using MPN:632013108 - Glock as an example) has a centerline/vial height of 3.2mm and body height of 5.5mm. The Tru-Glo TFO (low model) shares the same dimensions.
The Meprolight FT Bullseye Tritium Self-Illuminated Front Pistol Night Sight is not compatible with the IWI Jericho 941. I would recommend the Meprolight Sights for IWI Pistol Models, found by using the link below:
https://www.opticsplanet.com/meprolight-magnum-research-jericho-baby-eagle-tru-dot-front-night-sight.html?_iv_gun-model=iwi-jericho-941
The Meprolight FT Bullseye Tritium Self-Illuminated Front Pistol Night Sight for the VP9 is not compatible with the Optics ready model VP9. However, you can remove your rear sight completely and still retain the same functionality.
The Meprolight FT Bullseye Tritium Self-Illuminated Front Pistol Night Sight should be compatible with the Taurus GX4 since the GX4 was designed to accept OEM and aftermarket Glock sights. The correct model is MPN:632013108.
Yes, the Meprolight FT Bullseye Tritium Self-Illuminated Front Pistol Night Sight should work on a CZP10M. You will need model 632423108.