Because the G3C is not optics ready, you will need to use a dovetail adapter plate or have your slide milled directly for an optic. Please email us at Techsales@opticsplanet.com for more information. However, if you have a TORO model G3C, you can use adapter plate #2 included with your pistol to install this optic.
Yes, it should be compatible and work as long as you use the correct plate.
Please email us at techsales@opticsplanet.com so we can further answer your question.
An RMR plate should work.
Yes, this optics is night vision capable.
The Swampfox Liberty 1x22mm 3 MOA RMR Dot Sight is compatible with your Glock 21 MOS. You will need to use the #2 MOS plate included with your Glock in order to install this optic.
No, the Liberty uses the RMR footprint. The P365 FUSE will only fit optics with the RMSc or K footprint. Direct fit options for your Sig include the Shield RMSc, Vortex Defender CCW, Sig Romeo Zero, Holosun EPS Carry, Holosun 407K/507K and more.
If you do not have an optic ready VP9, you will need to use a dovetail adapter plate that replaces your rear sights with an optic plate. The correct adapter plate for a VP9 can be found linked below. If you have an optic ready VP9, you can purchase the RMR adapter plate from H&K which will be needed to install this optic.
https://www.opticsplanet.com/evolution-gun-works-trijicon-rmr-sight-mount-1-780-in-aluminum.html?_iv_gun-model=heckler-and-koch-vp9
Yes, the Swampfox Liberty 1x22mm 3 MOA RMR Dot Sight uses the Trijicon RMR footprint and will fit any aftermarket RMR pattern mount.
The Swampfox Liberty 1x22mm 3 MOA RMR Dot Sight can be mounted to a Glock 22 non MOS model using a rear sight adapter plate. The plate at the link below will work.
https://www.opticsplanet.com/evolution-gun-works-trijicon-rmr-sight-mount-1-780-in-aluminum.html?_iv_gun-make=glock