You would need to contact Trijicon directly to see if it is possible on your specific scope.
The Trijicon AccuPoint TR-22 2.5-10x56mm Rifle Scope eye relief is 2.8" - 4.1".
The base at the link below will work with a Remington 7600. The rings at the second link below should also work.
https://www.opticsplanet.com/talley-picatinny-base-for-remington-4-6-74-76-750-7400-7600-w-20-moa.html
https://www.opticsplanet.com/trijicon-30-mm-steel-accupoint-riflescope-rings-standard-tr107-intermediate-tr108-or.html?_iv_ring-height=extra-high&_iv_code=TJ-RR-Steel30mm-TR108
The Trijicon AccuPoint TR-22 2.5-10x56mm Rifle Scope can fit a CZ Scorpion as long as you use a scope mount or rings that provide enough clearance for your objective lens. Email us at Techsales@opticsplanet.com for more information.
To mount the Trijicon AccuPoint TR-22 2.5-10x56mm Rifle Scope on a Winchester Model 70 you will need 30mm rings that have a centerline scope height of at least 1.3". The exact height rings you need will also depend on the scope base you are using and the rifle barrel contour. However, the rings at the link below should work fine if you have a picatinny scope base for your rifle.
https://www.opticsplanet.com/nightforce-ultralite-30mm-titanium-alloy-ring-set.html?_iv_ring-height=1-dot-265-in-intermediate
The Trijicon AccuPoint TR-22 2.5-10x56mm Rifle Scope has a glass etched reticle.
The mounts needed to mount the Trijicon AccuPoint TR-22 2.5-10x56mm Rifle Scope on a Tikka Bolt action depends on the model of Tikka Rifle you are talking about. Here is a guide to help you:
https://www.opticsplanet.com/howto/how-to-choose-and-install-mounts-rings-bases.html
The Trijicon AccuPoint TR-22 2.5-10x56mm Riflescope does not come with a through lever, but the Trijicon Repositionable Magnification Lever fits this scope. This scope does come with lens covers.
The has an overall diameter of 43mm or 1.7" inches.
More information on the factory Warranty found here.
https://www.trijicon.com/support/warranty