Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Expert Review
Mounting made easy
Excellent tool. Makes mounting scopes about as simple as can be.
Like the manuf. states, lower quality components (cheap optics, mounts, etc) will yield mediocre results.
But if you use quality mounts and optics this thing is the best.
I have used it with all my 1 piece and 2 piece mounts without any issues.
Absolutely love this tool and highly recommend it
Like the manuf. states, lower quality components (cheap optics, mounts, etc) will yield mediocre results.
But if you use quality mounts and optics this thing is the best.
I have used it with all my 1 piece and 2 piece mounts without any issues.
Absolutely love this tool and highly recommend it
Most Helpful Positive Review
As easy as it gets
I've seen this and decided to give it a try. I've used an Wheeler Engineering Ultra scope mounting kit which is really good. Now that I have this Arisaka optic leveler Its even easier to mount a scope. I've used it by its self with no bubble leveler and it works great. With the wheeler engineerin...
Read More...
Read More...
Most Helpful Negative Review
Terrible machining that is normal?
Ramped piece has gouges, rough surfaces & missing coating alone tool contact surfaces.
This is my 4th or 5th unit as I keep giving them away and none of the others had this issue. Sent Arisaka an e-mail with pictures and was shocked at the response.
Arisaka stated most of these kits ramps look ide...
Read More...
Read More...
right tools for the right job
This simple tool is a must have for ones who mount scopes on their one. I have multiple scoped rifles and carbines and this tool guarantees propper leveling in relation to the weapon its mounted on.
Pros:
- easy to use
Cons:
- None
Would recommend: Yes
1 of 1 found the following review helpful.
Useful Tool
I bought this leveler not expecting too much, but it works pretty great.
Had my new Lpvo leveled realtively well with little to no effort.
No flash lights,bubble levels or anything else needed. Set it, screw in the mount a little and pull it out.
Could really not be any easier. Great Machining too! Highly recommend it!
Had my new Lpvo leveled realtively well with little to no effort.
No flash lights,bubble levels or anything else needed. Set it, screw in the mount a little and pull it out.
Could really not be any easier. Great Machining too! Highly recommend it!
Pros:
- value
- Construction
- Easy Mount
Cons:
- None
Best Used for:
- Mounting
- level
Would recommend: Yes
1 of 1 found the following review helpful.
Simplicity!
Although there are a lot of variables when it comes to properly mounting an optic on your rifle, this takes most of the frustration out of it. Need a level surface under optic for it to work properly. Ensure your mount stays level after torquing it down on cantilever mounts. Works best with individual ring mounts using top of receiver as level surface. Price seems a tad bit high for what you get and it would be nice to have a better finish and something to store them in.
Pros:
- easy to use.
Cons:
- Price and availability.
Best Used for:
- Quick mounting of an optic.
Would recommend: Yes
Precise and error proof
This tool makes mounting an optic precise and error proofed. Mine checked out perfect afterwards, but I still recommend checking level with a plum bob afterwards to be certain. Even with levels I always double check with a plum bob.
Pros:
- Easy to use, accurate and affordable
Cons:
- None
Would recommend: Yes
Saves lots of headaches
If you're like me and hate squinting at bubble levels, clamping your barrel, or waiting 2+ weeks and paying your gunsmith to level your scopes professionally, this is for you. I used this to level an Athlon 2-12X on a CZ 600 trail with an Aero Precision mount. I was initially worried that this wouldn't work due to the geometry of the mount (no flat surface parallel to scope bottom) but it *did* in fact level the scope after a few seconds of head-scratching. This leveling method depends entirely on the true-ness of your scope (bottom flat must be actually parallel to horizontal crosshair) and mount- if you don't have confidence in either one this may be questionable.
Would recommend: Yes
Arisaka leveler
Worked for the scope and rings that I had bought. Athlon scope on a bolt rifle.
Would recommend: Yes
Horrible machine work that is normal?
Ramped piece has gouges, rough surfaces & missing coating alone tool contact surfaces.
This is my 4th or 5th unit as I keep giving them away and none of the others had this issue. Sent Arisaka an e-mail with pictures and was shocked at the response.
Arisaka stated most of these kits ramps look identical & there is no issue What, this is s precision scope tool? The same Arisaka I have 10+ products from because they have amazing machine work.
Even the knock off units have proper machining, coatings & even come in foam/hard cases.
I wouldn't waste your money and I will no longer be purchasing from Arisaka if this is the new normal.
I knew QC was bad across the board but just wow Arisaka.
This is my 4th or 5th unit as I keep giving them away and none of the others had this issue. Sent Arisaka an e-mail with pictures and was shocked at the response.
Arisaka stated most of these kits ramps look identical & there is no issue What, this is s precision scope tool? The same Arisaka I have 10+ products from because they have amazing machine work.
Even the knock off units have proper machining, coatings & even come in foam/hard cases.
I wouldn't waste your money and I will no longer be purchasing from Arisaka if this is the new normal.
I knew QC was bad across the board but just wow Arisaka.
Would recommend: No
Great leveler
I’m scoping my rifle for the first time so read and viewed lots of videos. Most talked about using bobble levels. Stumbled on Arisaka leveler by accident. So decided to try it , looked pretty simple. And I’m very happy with the results. Works as stated. A note , remove the leveler parts BEFORE tightening the screws down.
Pros:
- Easy to use & Light Weight
- Easy to use and very light weight
Cons:
- None
Would recommend: Yes
Super easy for reticle alignment, faster than feeler gauges - only 2 caveats
These make reticle alignment super easy and fast. However, there are 2 caveats I feel you should be aware:
The biggest one is that it all depends on if your mounting platform is machined true, and if the scope tube is machined properly with the reticle aligned properly to the scope tube. On a quality setup, this should be fine. I'm talking like Japanese glass Vortex scopes (Razor) with a quality Picatinny rail that is in-spec.
The second caveat is if your scope turret/body size to rail clearance may not allow for this leveler to work. I only ran into this in a few situations. In that situation I had to use feeler gauges.
The biggest one is that it all depends on if your mounting platform is machined true, and if the scope tube is machined properly with the reticle aligned properly to the scope tube. On a quality setup, this should be fine. I'm talking like Japanese glass Vortex scopes (Razor) with a quality Picatinny rail that is in-spec.
The second caveat is if your scope turret/body size to rail clearance may not allow for this leveler to work. I only ran into this in a few situations. In that situation I had to use feeler gauges.
Pros:
- easy to use
- Precise
- fast
Cons:
- May not work in all situations
- Depends on quality of mount, rail, and scope tube
Best Used for:
- everything
Would recommend: Yes
1 of 1 found the following review helpful.
Arisaka Defense Combo Optics Leveler
Easiest Scope Leveler to use on the market. If you have a Pic Rail on your weapon and you are mounting an optic this is the leveling kit for you. Just slip the leveler base over the rail under the turret housing of your scope, slide the appropriate wedge into the slot on the base and insert until snug. The scope will level with the Pic rail or 1 piece scope mount. Easy as can be.
Pros:
- Ease of use
- very intuitive to use
Cons:
- none I experienced
Best Used for:
- leveling scopes on firearms with Picatinny Rails or in 1 piece scope mounts
Would recommend: Yes
1 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?