Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Epstein didn't kill himself
So i used this on a AK with the strike force adapter. It looks very good and matches the B5 grey color nicely. Ill buy another if i do a grey theme again. Shipping time from Optics wasn't bad either.
Most Helpful Negative Review
Aluminum is very soft
I would avoid this buffer tube due to the 6065 aluminum. It is way to soft and the threads strip very easily when tightening the castle nut. Had to return the one I purchased and went with another buffer tube that was 7075 aluminum and didn’t have this issue.
AT3 Buffer tube
Fits perfectly, threads are smooth and tight not sloppy. Odg color is a good match.
Pros:
- Price
Cons:
- None
Would recommend: Yes
Exact fde color
Great buffer tube, doesn’t leave slide marks from stock, and exact FDE color. No 50 shades of FDE here!
Would recommend: Yes
AR 15 parts
Great part fits exactly like it should the coating on it is very good. Processing of the order was a little slow in my opinion
Would recommend: Yes
Great fit and color.
This fits perfectly and the color is great. I'm trying to get this build to be as close as possible to same color for all components without having to paint them all and this is really close to Brownells aluma Hyde coyote.
Would recommend: Yes
Way out of spec
I bought this tube expecting it to be milspec as the name suggests. The 6 position holes were poorly drilled and the tube wasnt concentric. It was thicker on the bottom which was letting the buffer sit higher and slip over the retainer. This could just have been a fluke in the production chain, but milspec is literally the bare minimum so it's pretty disappointing when it falls short.
Would recommend: No
Would recommend
Threads were not consistent, color was more green than FDE.
Pros:
- NONE !
Cons:
- LISTED
Would recommend: No
AT3 Tactical AR-15 Mil Spec Buffer Tube
Awesome and affordable buffer tube. It was perfect for my Kris Vector Pistol Brace Instillation.
Pros:
- Durability
- affordable price
Cons:
- None
Best Used for:
- AR-15
- Kris Vector
Would recommend: Yes
AT3 Tactical AR buffer tube
High quality and light weight. Good fit to the adapter I chose. Also matched up well with the SBA5 pistol brace. Definitely recommended.
Would recommend: Yes
No notch for the retainer spring
This has no notch for the buffer tube retainer spring. So you have to screw the buffer tube into where it will hold down the buffer retainer. If because of the way this one works it was holding down the spring but not by enough according to my range time. Major Malfunction while shooting, the spring came out while the BCG was in the tube. This ejection, caught the BCG not allowing it to come forward. Upon examination, this buffer tube won’t allow another turn because it hits the peg and won’t allow 1 more full rotation. So you have to back it up by 1 spin. The placement holds down the retainer spring but it not enough, the vibration of shooting will set it loose in less than 5 shots.
Would recommend: No
Notch not machined for retaining pin
The buffer tube was not machined to have a notch to catch the retaining pin. It’s going back and I will order a better quality part. Tried to save a little money, but you get what you pay for.
Pros:
- The finish looked nice
Cons:
- No quality control
- Not a complete product
Best Used for:
- Paper weight In its current condition.
Would recommend: No
There are no reviews that match your criteria. Would you like to review this product?