A Customer from United States, WA Public Profile

Bought this along with many other nibx parts to build out an anniversary gift from my wife. This completed the upper and my wife had a lower engraved to celebrate our 20th anniversary. It is different from the same old black builds and stands out in a good way. Fit was builder grade and also fit the budget. I could see this as a broke honey badger clone part if you wanted to go that way.

The old ones with the silver pin were money. I've had over a dozen of these over the years and this new one did not fit anywhere close. Tried on several uppers... Aero, std milspec, psa, etc. And it did not fit enough to close. Bought for a custom build for someone else and it clicked in but damaged his upper since it was locked closed. This one is in the trash since it isn't worth sending back. Gave one off on old build and worked perfect.

I wanted something to train with in 22lr so I could save my 9mm this year. I already have a tx22 and though close to my carry size, this allows me to use the exact frame I carry around as a backup. Once the eat everything mod was done, the only hiccups I had in the 400 round first session was magazine related. If you put 15 in a new mag the spring pressure is a little too high and will hang up when feeding the first few rounds. Once I figured that out, it ran suppressed 150 rounds and the rest were without the can after it cooled down. If you already have a g44 or tx22 compact, you don't necessarily need this, but if you have a gen3 glock or clone and don't want to buy another gun, maybe give this a try. I have since ordered 3 more mags and plan on getting a plate kit to mount a 507k.

Bought one of these originally because the radian I wanted was not available. Figured I'd give this one a try. I'm glad I did. When installed, it is smooth and sounds quieter than any other CH I've owned. This difference as well as the quality fit, finish, and ergonomics made my rifle feel more expensive than it really is. This is so good that I now own 3 with plans to buy at least a couple more.

Bought this for a 1022 sbr with the pmaca chassis. It takes up 6 slots and the pmaca is 8, so it was at least symmetrical. Without buying the full size bravo and cutting it down, this is the next best bet for an ar or sbr with about an 8 to 12 inch barrel. I like the slight rake it has and angled it forward to aid with the handling of the 1022.

So far I have bought about half a dozen of these 3 lug barrel adapters. These are reasonably priced alternative to the rugged ones, and the only difference is that the KVP one does not have the go no-go feature. I use a little rocksett on these with standard torque and it is good to go. Will be buying more as soon as my dissent 9mm upper ships. Also these work with the Griffin 3 lug mount on a Bushwacker 36 just fine. Both cans stay aligned and no baffle strikes even under rapid fire. Only complaint is that the AR9 barrel is a little larger in diameter and you can see the step down going to this smaller diameter device. It has no wrench flats and you have to use the special tri lug wrench to install it. I have no issues with these design choices since it will go on dedicated suppressor setups where you don't notice it too much.

After about 400rds on a 5.5" 9mm banshee, I started getting strange jams and what I thought was failure to extract. Bought the bcm extractor upgrade and it made the problem worse. Looking on forums, it was advised that it was an ejection issue and the mk4 springs were weak from the factory

If you are not shooting suppressed and want a simple yet effective extended latch charging handle, buy 2 of these for the cost of 1 upgraded changing handle and put those milspec ones you have to good use. For installation, use a thumb tack to hold the assembly together so the roll pin can be driven in.

Looking to make a reliable blowback pcc? These enhanced feed cone barrels eat hollow points and fmj without any issues. Blowback9 covers 4 reliability mods for the AR9 and this is confirmed to be one of the crucial mods to trust this build for home defense. I have a 5.5 on a sbr with a can and this 8.3 as a pistol with a short flash can and these barrels are what you need for hollow points.

Purchased this for the weight and length of a real suppressor to use on a dedicated 22 upper. Though a little smaller in diameter than a sandman, it works for my purpose. An added benefit is increased pressure for reliable cycling and no noticeableshift in zero. Would buy again.