castanagajt from United States, NV Public Profile

Airsoft ok so I will do airsoft talk now. I was a very avid airsofter and still a real steel person too. This is a version 2 motor like the ar15 motors tokio Marui style airsoft so it is easy to hop up at your local airsoft shop for better feet per second even rounds. The body is all metal which indicates a much better quality airsoft gun. It can take any red dots on your airsoft gun. Why Not? give airsoft a try.

chances it will run best with a nunchuck lipo or a decent nimh battery, .20 to .25g bb to feed.

Airsoft ok so I will do airsoft talk now. I was a very avid airsofter and still a real steel person too. This is a version 2 motor like the ar15 motors tokio Marui style airsoft so it is easy to hop up at your local airsoft shop for better feet per second even rounds. The body is all metal which indicates a much better quality airsoft gun. It can take any red dots on your airsoft gun. Why Not? give airsoft a try.

chances it will run best with a nunchuck lipo or a decent nimh battery, .20 to .25g bb to feed.

A full colt style ar9/40/45 series bolt carrier group. Full! firing pin and extractor side for cheap! Yes, these are all made in Lake Havasu, AZ. I saw with my own eyes when I toured the shop and get a new ar45 extractor. This Gen2 extractor works perfect and did not break yet! Try and find old colt parts and these are hard to find and expensive. Get this kit if you have a PCC that takes these. It is so affordable.

comes with the firing pin, firing pin retaining pin, extractor roll pin, extractor, extractor floating spring.

Got a colt style 9mm bolt carrier group needs a new extractor? This is hard to find and if you find it it is Expensive! I have on in my ar45 that I made.

It will work on 9mm, 45acp, 10mm, 40sw as long as it is colt style ramped pcc bolt carrier group. I have broke the first generation one. This is actually Gen2 with a tension bend that gen 1 did not. Made of better Steel than gen 1. I did NOT break Gen 2 yet so it is still in my defense ar45. I would know about this extractor as I went to R&d precision with my wife at Lake Havasu for vacation and gotten a few to try.

It fits well and comes with the extractor roll pin. You need to buy this kit and stow it away.

RDPrecisionAZllc or R&D precision. This is a firing pin rebuild kit. If you have light strikes? Chances are your ar9/ar40/10/45 bolt carrier group needs a rebuild. the tips can and do break from time to time. I would know. I have a few R&D bolt carrier group and even a stern defense 40acp bolt carrier group and this firing pin kit will drop in. Can it go into others? I am sure. This is way cheaper than hunting around for an original colt pcc firing pin.

This is a "floating" style firing pin like the colt 9mm pcc bcg was intended. This kit will come with a firing pin, the firing pin spring and a roll pin.

The built PW9 are the same (Non-Ramped) ar9 barrels. the pw9 as a complete upper or a complete PW9 is a barrel with its muzzle device permanently attached to it. Those are fine as is on those guns.

These PW9 barrels can go on any general style non ramped ar9 pcc or pdw diy builds if you wish. I think it has a a 1/2x28 or 36 thread that takes a 9mm flash can, linear comp, compensator for pistol caliber carbine (pcc) builds.

They do have the index pin at the 12 o clock and can fit any general style pcc upper, RD precision has one, by the way. Even a forged mil spec upper if you have to.

Can fit New frontier Armory, joebob pcc uppers

Yes, these are blow back 9x9mm only. The come in four sizes.

This is actually a slight revision of the original. This is more aesthetically pleasing on the Upper. The muzzle device works and is permanent. Same with the rail.

The upper is a (non-ramped)9x19mm barrel with a (colt pcc) ramped, internal extractor and floating firing pin with the narrow trigger cut out bolt carrier group.

The charging handle is a side charger on the left hand side. It is best to load the magazine and tuck it under your wing and pull the charging handle as far as you can and then (MANUALLY push the side charger handle forward) you will feel a slight drag and a click sound. It was designed to be non-reciprocating.

It does fit with ar15 lowers with mag wells or most pcc 9mm lowers like New Frontier, Joe bobs.

It is truest 9mm bolt carrier group to original successful Colt style 9mm Pistol Caliber Carbine that took the old stick style 9mm colt magazines.

This Does work with pcc builds with Glock 19/17/18/34 any "Glock" style 9mm magazine, as well.

It is blow back and black nitride coated. The extractor is like a (1911 extractor) so it is internal in the breech face. You can purchase those "colt-style 9mm pcc extractors here or rainier arms. The firing pin is "colt" style and is free floating for safety that too can be bought here or rainier arms. It is a good idea just to throw in your spare parts bin.

Tail weight is semi -permanent. You won't ever need to mess with it. This RDPrecisionAZllc is perfect for 9mm.

this RDPrecisionAZllc 9mm bolt carrier group has a good weight in it and in combination you will need a 9mm spacer in the buffer tube and a standard ar15 3oz buffer minimum. An H3 or a 5.8oz buffer is Optimum.

An extended 9mm pcc buffer (without a pcc buffer spacer) is best.

It is ramped in the bottom to pick up the 9x19 round from the magazine and you will need a (non-ramped) 9mm barrel.

The hammer cut out in the middle of the 9mm bolt carrier group is for standard milspec style ar15 hammers. It will obviously, fit most 1 stage or two-stage triggers be it regular or drop in triggers.

Bad: It may not work with binary trigger setups because of hammers and the disconnector mechanisms. Too narrow of cut out.

I saw this in person when I was invited to RD precision at Lake Havasu, AZ around May of 2022.

It fitted magazine wells of mil spec forged, all the various race gun billet ar15 billets that he had laying around. Easy to install and the old 9mm surplus stick magazines are so easy to find.

If you are just like me, those Glock magazine angles in a forged lower or let alone a Personal Defense Weapon with that steep angle (Glock) magazine when inserted can start to look funny.

I loved The installation, taking the magazine well assembly is easy to take out. Ejector is generously built, feed ramps intermating with a standard forged upper or billet upper with a 9mm barrel (non ramped) is perfect. Same with the (colt style) 9mm bolt carrier group with the ramp in the bottom works.

Yes, the magazine well and the components are built and manufactured with American parts by American workers, there.