Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
castanagajt's Review of R&D Precision PW9 Colt/Glock 9mm 5 inch Upper Receiver Kit
This is actually a slight revision of the original. This is more aesthetically pleasing on the Upper. The muzzle device works and is permanent. Same with the rail.
The upper is a (non-ramped)9x19mm barrel with a (colt pcc) ramped, internal extractor and floating firing pin with the narrow trigger cut out bolt carrier group.
The charging handle is a side charger on the left hand side. It is best to load the magazine and tuck it under your wing and pull the charging handle as far as you can and then (MANUALLY push the side charger handle forward) you will feel a slight drag and a click sound. It was designed to be non-reciprocating.
It does fit with ar15 lowers with mag wells or most pcc 9mm lowers like New Frontier, Joe bobs.
The upper is a (non-ramped)9x19mm barrel with a (colt pcc) ramped, internal extractor and floating firing pin with the narrow trigger cut out bolt carrier group.
The charging handle is a side charger on the left hand side. It is best to load the magazine and tuck it under your wing and pull the charging handle as far as you can and then (MANUALLY push the side charger handle forward) you will feel a slight drag and a click sound. It was designed to be non-reciprocating.
It does fit with ar15 lowers with mag wells or most pcc 9mm lowers like New Frontier, Joe bobs.
Pros:
- Bufferless, beautiful, works. non reciprocating
Cons:
- charging handle needs to be pushed forward after charging or result to damage.
Best Used for:
- PCC PDW 9mm
Would Recommend:
Yes
1 of 2
found the following review helpful.