Your Browser is OutdatedReviews by comrad
quality control is lacking
Written on Jan 14, 2023
Maybe it was just the two that I got, but the width of BOTH of the Mod2’s that I got (FDE and BLK) didn’t appear to be milled to proper specs. Literally, once the handle got into the channel of the upper, it wouldn’t move (forward or back). Tried in 3 different uppers - same issue. No issues with the Mod1, nor any issues with the 4 other handles I have - just these. Weird. Hopefully it was just the batch I got. I had great luck with the original ones - maybe I’ll go back to those.
2 of 2 found the following review helpful.
Great for the Henry Long Ranger
Written on Nov 23, 2022
Really nice fit from an American company. I have mine mounted to an Heirloom Henry Long Ranger and it fits perfect (Heirloom just means we got to pick our serial numbers). This rail should fit all Henry Long Ranger models.
The back of the mount (where the hammer sits above) is rounded and provided a great fit for where your thumb will be for a lot of your shooting.
The cutout along the top of the rail is nice, so you can leave your iron sights and have a “peep” view under your scope mount (depending on the scope you select).
Hex screws provided were high quality, machined well and they provide you the proper hex to use and the torque specs…and an extra hex (my kit had 5, which is a nice thing to have just in case for the future).
The overhang at the front (toward the muzzle), literally overhangs the flat cut out of the top of the rifle, so you end up getting 3/4 of an inch extra room to adjust your scope rings. The rail is a tad over 5” and, with a little blue Loctite (we use 243), should provide a lifetime of service.
Note: the holes on the rifle run THROUGH and into the bolt, so put the Loctite on the screws/threads first (on a napkin) let drip dry, then install…you can also wipe the interior where the bolt is housed just to be safe if you go overboard on the glue.
20lb is screw settings and you can go a little lower if you’re using Loctite.
Good luck!!!
The back of the mount (where the hammer sits above) is rounded and provided a great fit for where your thumb will be for a lot of your shooting.
The cutout along the top of the rail is nice, so you can leave your iron sights and have a “peep” view under your scope mount (depending on the scope you select).
Hex screws provided were high quality, machined well and they provide you the proper hex to use and the torque specs…and an extra hex (my kit had 5, which is a nice thing to have just in case for the future).
The overhang at the front (toward the muzzle), literally overhangs the flat cut out of the top of the rifle, so you end up getting 3/4 of an inch extra room to adjust your scope rings. The rail is a tad over 5” and, with a little blue Loctite (we use 243), should provide a lifetime of service.
Note: the holes on the rifle run THROUGH and into the bolt, so put the Loctite on the screws/threads first (on a napkin) let drip dry, then install…you can also wipe the interior where the bolt is housed just to be safe if you go overboard on the glue.
20lb is screw settings and you can go a little lower if you’re using Loctite.
Good luck!!!
1 of 1 found the following review helpful.
Great little kit
Written on Apr 16, 2021
Review for
Browning Screwdriver Tool Kit
Great little kit to have on hand...the sliding lock (enclosure) broke on mine (2 year olds)...nothing a little tape doesn’t fix.
Includes the most useful sizes for most repairs. Does not include smaller Allen keys***
Includes the most useful sizes for most repairs. Does not include smaller Allen keys***
There are no reviews that match your criteria. Would you like to
reset filters?