Dude from United States, WY Public Profile

Bought this after blowing the glass out on a different optic due to high recoil. I read somewhere that the lack of electronics makes this handle high recoil better. After mounting this securely, I noticed it wiggles side to side, mostly the front area where the glass is. The mount is secure to the rail, and the 4 screws that secure the mount to the optic seem tight, but there is wiggle somewhere inside the optic. Seems like its under spring tension because it always returns to rest on one side.Although minimal, I would think there should be none at all. I hope its not the horizontal adjustment pivot.I’d prefer it was brighter, but it seems bright enough. If it doesn’t fall apart after few hundred rounds, I might get the polarizer and or the light kit. Seems like the price might be a bit high for what you get. Very nicely packaged.

Does not fit, Spikes, Aero, Wilson, Anderson, Joe Bob lowers. The holes do not match up, no way to install both pins. Included pins are wrong length.

DOES NOT FIT M5 LOWER, the pin holes do not line up, the included pins are 3/8” too long. Looks well built but does not fit.

Bought a few of these at great price from DVOR. Finally getting around to installing them. They do not fit mil spec ar 15 lowers, pcc lowers or ar 10 lowrs. PINS DON’T MATCH UP WITH HOLES. Can fit one but not both, some of included anti walk pins are way too long and would stick way out if you could fit both. I finally forced both pins into a cheaper lower, and the safety selector did not work. It’s a shame because that look and feel nice outside the box, but definitely do not fit. Failed to fit: Anderson, Aero Precision, Wilson, Aero M5, Genesis AR10, Spikes 9mm, Joe Bob pistol.

This item arrived with the finish rubbed off in several areas, and is unfinished on the inside. You can see the unfinished silver inside through to the outside. Every time I look at the thing there is black worn off somewhere. I try to touch it up with aluminum black, but some areas don’t seem to blacken. Also, the clamp screws were so tight, the hand guard was bitten into the knurled barrel nut so tight that it was difficult to remove. I own other CMMG items that are superior quality, this item falls short.

My first thought was wow, nice packaging, however, upon removing this hand guard from fancy plastic tube package, the finish is noticeably worn on many spots possibly from shaking around inside the tube. When disassembling prior to install, the screws had been tightened so tight, the barrel nut would not release from inside the hand guard because it had been tightened so much that the knurled barrel nut had bitten into the clamped portion and the clamped portion would not release. I question if this part has been used before or if it was tightened this much when packaged? I’ve got pictures of I can figure out how to upload them.

Using with SIG SAUER Spectre Comp Slide Assembly P365/P365XL/P365X 9mm Luger w/ Integrated Compensator and X-Ray3 Day/Night Suppressor Sights and Wilson Combat frame. Call me a hack idiot, too lazy to return item but it wouldn’t fit/function until I filed down the circumference of the end that contacts the barrel just a bit. Tried two different barrels, neither worked at first but after filing down the factory Sig barrel works with this spring. I’m sure somebodys out there will tell me why I shouldn’t have done this.

Cheap enough to try for SIG SAUER Spectre Comp Slide Assembly P365/P365XL/P365X 9mm Luger w/ Integrated Compensator and X-Ray3 Day/Night Suppressor Sights, it would have fit well if not for the tall sights. Also need to shave off a bit because Romeo 0 would force slide out of battery before fully seated. Also using Wilson Combat compact frame.

Does not come with proper screws to fit SIG SAUER Spectre Comp Slide Assembly P365/P365XL/P365X 9mm Luger w/ Integrated Compensator and X-Ray3 Day/Night Suppressor Sights. Didn’t use steel guard, seemed to prevent the sight to flush fit to slide, better fit my slide without using it. The battery pinches between the frame & sight, not sure I trust this setup because the battery is way to the front and screws way to the rear, being that sight is plastic seems like it puts added stress. Does come with extra screws that fit other platforms. I wouldn’t buy this sight unseen, make sure it comes with the screws you need.