Your Browser is OutdatedJohn from United States, CA Public Profile
Reviews by John
10mm ROF Riser + Extended Hex Screws
Written on Sep 18, 2024
Review for
Reptilia ROF Riser for Trijicon RMR
The extended 1" length hex screws to mount the RDO worked fine on the RMR, but the included hex screws have a large head diameter by approximately 0.03" vs the factory RMR/holosun torx screws that caused binding on the 507 comp red dot housing gouging it. I did have to purchase additional #6-32x1" with 82 deg taper torx screw to clear the 507 comp housing. Torx fasteners appear to have a smaller head diameter and fit fine and may be needed if using other RDOs that are not RMR
2 of 2 found the following review helpful.
Reptilia AUS Optic Mount + ROF-90 + 10mm Riser
Written on Sep 14, 2024
Review for
Reptilia AUS Optic Mount
Solid mount but take into consideration the height of your elevation turret. I did need to purchase the 10mm riser to mount my Holosun 507 comp red dot to clear the elevation turret. Next, the extended hex screws to mount a RMR mount into place will work with an RMR, but the included hex screws have a large head diameter by approximately 0.03" vs the factory RMR/holosun torx screws that caused binding on the 507 comp red dot housing gouging it. I did have to purchase #6-32x1" with 82 deg taper torx screw to clear the 507 comp housing; vs the holosun torx screws the new replacement screws were 0.01" larger head diameter and cleared fine.
SPR rifle build grip
Written on Sep 03, 2024
Review for
B5 Systems P-Grip 23
Wanted a more vertical grip vs Magpul MOE grip for an SPR build and chose B5 grip that fit the build. I also prefer the aggressive texture of the B5 systems vs the smooth Magpul grip. While the grip is very affordable i do wish the grip plug was included. The Magpul design for the grip compartment is preferred .
There are no reviews that match your criteria. Would you like to
reset filters?