Keithy baby from United States, MA Public Profile

These are useless made in china garbage. Maybe try putting a snap button at the bottom of these? There's no possible way to attach these to the cummerbund on the premium plate carrier from RTS safely, snuggly, and comfortably. If you just lace the straps through the molle on the inside / outside of the bund, they'll flop around and drop down a few inches. Apparently, the carrier is supposed to have a velcro hook n loop built in pockets for these on their cummerbund for attachment but the unit I received certainly does not. Maybe they changed the protocols? What's the point of having side plate pockets with actual armor if you can't properly attach it. Plus, stitching on the bottom corner on one of these is already coming undone. Just spend more $$$$$$$ and get better quality

Received this carrier along with the 6x8 side plate pockets 2 weeks ago and it's getting sent back to Optics Planet later today. It's supposedly made in america but it is not. Made in china tags all on the inside of side pockets and carrier. Feels a bit chincy & cheap. The side pockets do not have any feasible way of attaching to the cummerbund. Apparently they made a bund with the ability to un-velcro for putting in the side pockets but that's not the one I received. My 6x8 plates fit into the pockets but just barely. So tight I cannot hook and loop the top to close them in. Stitching on one of the side pockets is already coming undone on the bootom corner and you know that's only gonna get worse. The shoulder straps leave lots to be desired. I can just tell these products will not last very long with a decent amount of wearing & hard use. I didn't want to have to spend $400-600 for legit armored protection but that's just got to happen. HRT, LBT, Shellback, Crye, Agilite, Ferro concepts etc... is the route to go

I purchased this rig about 2 years ago. Wore it at the gun range several times just to get the feel of it and prepare for battle against the NWO. Just bought 10x12 LV4 guard dog opmod plates and a pair of caliber armor 6x8 side plates. Put all 4 plates into the rig yesterday. Within 3 hours of installing plates, the left side shoulder strap tore off from the back plackard and is totally severed. Can't be re-stitched because the same thing will happen. Just a bad poor design. I'd say the total weight of the plates is about 22-23lbs. Carrier should be able to handle that but it certainly couldn't. I'm going to contact Guard Dog and see if they'll replace it. Not holding my breath

I love this belt. I run mine through a high speed gear laser padded belt(the bigger one not the slimline) and it's a great combo. I'm sure the inner velcro works fine but I much prefer a padded one for comfort. I like the 2" belts much more than the typical 1.5" or 1.75" battle belts. Wider, thicker, and tougher works better for me. I'm looking into buying another one for my other rig. You can tell it's made of top tier materials & is quite well made. I have the D3 V1 belt which for about $130-$145 is a dang steal. Wouldn't mind trying the regular D3 belt but It's about $200 which I'd rather not spend on a belt especially when you can get pretty much the same thing in this D3 V1 belt. You won't be disappointed if you buy

Purchased this cap along with the Arisaka end cap for the streamlight 1 or 2 lights not the HL-X. Bought all the components to run the light with the DBAL-A3 all through the Unity Axon switch. They work like they should. Flawless and seamless. Got all these pieces on an LMT 16" quad railed carbine. Buying these 2 caps is still far cheaper than an actual surefire light which are highly overrated in my opinion. Streamlight is fine quality and does just fine. Don't hesitate as these work great

So I purchased this surefire cap along with the arisaka adapter for the streamlight HL-X that I already had. This cap along with the adapter from arisaka fit perfectly. If you looked at my weapon light, you'd think it was 100% streamlight it's that seamless. The only negative is the cost even though all surefire products are highly expensive and certainly overpriced. Flashlights for $350-400 is rediculous because when it all boils down, we really don't need weapon lights whatsoever. They just look sweet and are "tacticool" but we don't need em at all. Put a DBAL D2 on my HK M27 along with the unity tactical axon tape switch for the laser / light combo so figured I'd buy these two adapters for the light instead of spending hundreds more for a new one. Products work great and function very well

My second one. Bought the 3.5x model with the .308 crosshair reticle which is on my piston driven LMT quad 16" rifle and this one is on my LMT 20" quad rifle. Only thing I want better is the eye relief but not a deal wrecker plus I knew that prior to buying it. Fixed power prism optics have crappy eye relief and I know that and have known that. Fov is awesome, glass clarity might be the best in the world , reticle is beautiful but not overwhelming plus appears to be spot on as far as BDC marks. If Acogs were a couple hundred less dollars, I'd buy at least 2 or 3 more yet at this point, I might buy a couple more anyway. Last thing is these optics are beautiful looking too and lightweight. Can't go wrong with a 'cog

My first ACOG but not my last. Just received the 4x RCO COG for my LMT 20" 5.56 and this 3.5x COG is on my LMT piston 16" quad railed .308 The only complaint I have is the etching of the reticle on the glass. I would love it if it was a tad more pronounced and a bit larger which would be easier to see but it's not horrible or anything like that. Just want it a bit more pronounced. Glass is crystal clear, eyebox is good, FOV is fantastic. All in all, it's an ACOG. You can't go wrong. I'd love it if they a few hundred less but they are not. Got 2 now and I'll probably buy another 1 or 2

I like this stock. Kinda wanted the 11.5" but at time of my ordering, it wasn't in stock at OP & now it is of course. No issue though. This one is good enough. Definitely better instructions would've been a nice addition instead of the tiny piece of cardboard with very small print on it for the install but figured it out pretty quickly. Looks killer on my Stribog SP9A3G. Now gotta take it out to the range and try it out. Shot the bog w/o a stock on it a couple wks ago and was fun but this will make it a much better weapon

Ordered this junk a couple months ago from Dvor after reading the mostly positive ratings and being a fan of these reflex optics with multiple reticle options and I really wanted to like this one from Falke but it's just a hunk of junk. It will not turn on every time I want it to. I'm messing with it right now in my living room and it's dead and won't turn on EVEN though it's on it's second battery plus I just tried putting a brand new battery from the two pack I had to buy a couple weeks ago after the original battery died after having the optic not even a month. Keep in mind, the lil CR2 batts cost almost $14 per two pack so yeah this thing blows. I know this to be 100% true yet I don't always follow but YOU GET WHAT YOU PAY FOR. I got this optic & the 5x Falke magnifier combo for $355. There's reasons why an EO tech is hundreds more or a Holosun (which I have on another rifle & is phenomenal) is a few hundo more. I have this combo on a Daniels M4A1 and last couple range trips, I had to beat the snot outta the optic smacking it around with an open hand to get it to turn on. Just pushing the button would not do it. Nice when it ACTUALLY turns on but all in all, it's a piece of garbage. Gonna try to return it asap