Your Browser is OutdatedLeon from United States, NJ Public Profile
Reviews by Leon
a usable rear A2 sight at a decent price
Written on Nov 12, 2025
Review for
Luth-AR A2 Rear Sight Kit
This sight comes completely disassembled, so one should be careful, especially with the detent balls, as they can be easily lost (using grease helps to keep them in place). This rear sight is not as tight to the receiver as the one from RRA, but it is cheaper, so as the sight goes up and down it turns ever so slightly with respect to the receiver, and when it is almost all the way down, one can rotate it a bit by hand. I know this doesn't impact accuracy, but it feels less solid.
good stripped upper with handle
Written on Nov 12, 2025
It's a reasonably well made upper receiver that I plan to use with a rifle gas system, so lack of M4 cuts is not an issue, but if someone wants it to have M4 cuts then need a different upper.
good slide with no break-in required
Written on Feb 07, 2024
This slide makes it very easy to operate the slide manually. The slide worked with no issues out of the box.
Aimpoint T1 4moa is as good as 2moa
Written on Nov 02, 2018
Review for
Aimpoint Micro T-1 4 MOA Red Dot Sight
I have an H1 2moa and it is very difficult to tell the difference between 2 and 4 moa. this went on my Ultimak AK47 rail. Since T1 can handle ambient temperatures of 160F this should last well even on the gas tube. All controls work well, the packaging did not include a box, which was a little strange, but all the parts were there. I also bought the aimpoint LRP mount, which lets me have a 1/3 (1/4) lower cowitness on the AK. Worth noting that irons need adjustment when the optic is in place, since there is going to be a shift because of the two glass lenses in between where one is tilted. So clearly it depends on the anticipated usage of the cowitnessing.
2 of 2 found the following review helpful.
Lowest quick release mount
Written on Oct 06, 2018
Review for
Aimpoint Picatinny Mount Base
I bought this to use on Ultimak rail with my AK. This provides good 1/3 lower cowitness. One thing a user must decide is what the backup strategy is. A red dot shifts the POA of the irons slightly, so one should decide if the quick release is the backup or lower cowitness. And short distance it likely will not matter much, but for longer distances the shift can be several inches.
2 of 2 found the following review helpful.
A bright clear red dot
Written on Dec 09, 2017
Review for
trijicon-6-5-red-rmr-type-2
I tried a few such dots. With astigmatism it is difficult to use a red dot, but one can, given a large enough dot, get used to where the dot is. This dot gets dimmer in the dark and its batteries should last long enough to replace the battery annually while always having it on. I am waiting for my pistol slide to be milled for it, but it works very well on a shotgun with a proper base.
1 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?