Your Browser is OutdatedReviews by mikiegro
Not for me
Written on Mar 14, 2024
Nice grip angle and somewhat comfortable in size but the back side where the web of your hand is kind of squared off not tapered back like an ERGO or Hogue grip. The texturing is too smooth for me. Could be a bit more aggressive. I do like the angle. Does not have a compartment which is not a game changer for me. If they put a rubber over mold on it and thinned the back it would be perfect. Did I say I liked the angle?
0 of 1 found the following review helpful.
Best of the best.
Written on Feb 13, 2024
Have tried many grips, Hogue, Bravo company, MFT, Magpul multiple models, and Troy. I continue to come back to this grip with the small thumb shelf for right hand shooter. If there was improvement to be made it would be to offer in a 15 or 17 degree model and throw in the filler piece in the webbing part of your hand for out of spec. receivers. I like the fact it is not real thick and seems to fill my hand well. Medium to large hand size. I have bought at least 10 or more for Ar15s and Ar10 I have built or customized.
Don't know what the hype is.
Written on Feb 25, 2023
Review for
HIPERFIRE Enhanced Duty Trigger AR Fire-Control Group w/Curved Trigger, 4.5/5.5lb Pull Weight
Replaced an ALG trigger with this because of the light high-speed hammer. The castings are rough especially where the hammer face contacts the firing pin. Not a smooth surface at all. Has some drag on the reset. After some polishing and stoning, the trigger is acceptable but for $100 bucks you shouldn't have to touch it up/ The ALG finish is much nicer and is Nickle boron coated but was willing to try the Hiperfire because of the hammer weight and lock up time. The nice thing about this trigger is there is very little over travel and no take-up with a small amount of pull thru when the sear releases. If your looking for a replacement "duty" trigger than I would go with the ALG or BCM. I could think of other things to waste my money on then a ho hum trigger I wont use.
2 of 4 found the following review helpful.
Not bad, not great
Written on Feb 23, 2023
Review for
HIPERFIRE Enhanced Duty Trigger AR Fire-Control Group w/Curved Trigger, 4.5/5.5lb Pull Weight
I bought it to replace an ALG trigger. The ALG is smoother but has more take up and more overtravel. Plus it has a full size hammer so it has slower lock up time, but it is a good quality duty trigger. The Hiperfire has quick lock up time, no take up and little pull thru and very little over travel but it seems gritty. I took it out and polished and stoned the disconnect sides and top of sear where hammer pivots on. Then polished the hammer radius that contacts the top of trigger. It is now acceptable but if I were to do it again, I would spend more and get a Velocity or Timney drop in.
0 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?