Reviews by NATHAN CUNNINGHAM
Quality Midwest Industries Barrel Nut Wrench
Written on Oct 05, 2026
I havs purchased 3 MI handguards over the years and they always came with a barrel nut wrench that was just a wrench cut from a sheet of steel. The old one works fine with my Midwest Industries rails as well as other brands like American Defense Manufacturing barrel nuts also. This wrench here is quality material and machining. I ordered this to replace the 3 cheaper wrenchs i have now. Well worth the price.
0 of 0 found the following review helpful.
Awesome Green Dot Optic
Written on Aug 23, 2026
This AEMS ProX2 in green is my mew favorite optic. I have Primary Arms SLx 3x & GLx 1x along with Holosun HE510c-GR and this and the GLx 1x are my 2 favorite optics for shooting 50yds and closer. AEMS I bought as a bundle deal at Scalarworks. They offered the AEMS ProX2 for $330 if I purchase it with their LEAP15 qd mount thats made specifically for this optic. Dot shows up good and the glare is alot less than the HE510C plus emitter is enclosed and the front & rear lens have sacrificial flip ups. Comes with solar panels and battery. Auto brightness seems to work good and does a better job choosing the brightness level than my HE510C does. Made of 7075 which is good. Eye box isn't as large as the HE510C or larger AEMS versions but its still large enough that it doesn't matter to me. Great optic from Holosun.
1 of 1 found the following review helpful.
Best MLOK Scout Mount Available
Written on Aug 23, 2026
Well built and fully adjustable angle along with QD MLOK attachment. Pick a slot and tighten it down with the thumb wheel. Next set your angle and tighten both hex screws and your set. Have yet to have it move and with the Axon SL and Arson Machine wire management clip it takes about 15secs to remove pad, clip and flashlight & mount. Awesome design and IMO the best Scout mount avaliable for MLOK
0 of 0 found the following review helpful.
Best Version Of Reardens Atlas Hub
Written on Oct 10, 2025
Ive had the Gen1 & 2 Atlas in both Heat treated & Nitride. Heat treat i like the look of but carbon comes off the slick nitrided finish better. I sold those and just got the new Gen 2 but with Titanium & DLC SLINE finish and this is the best Atlas there is. Lightweight and the DLC finish is super easy to clean compared to the Heat treated. No gas leakage at the threads which i had with the heat treated version. This is my favorite hub besides my special edition DD Zilch DLC hub.
1 of 1 found the following review helpful.
Perfect For Zilch Hub
Written on Oct 10, 2025
Review for
Q Rearend, Cherry Bomb
I like the Cherry bomb but got this because of the extra wrench flats. Nice having the 1/2" socket on the front with no need to time. Goes perfectly which my DD Zilch hub and it actually saves me about a 1/4" off length. Been using my on ADM UIC 14.5 with OCL Polonium K, JP SCS H2, Lantac Nitride EBCG, Radian SD handle, JP Enhanced DLC bolt, Triggertech Diamond Blue, Superlative AGB, Spikes Melonited Gas Tube and this baby screams with a nice 330 ejection pattern. Getting ready to match this with my new Ridgeback Defense Rhino S & Zilich DLC hub.
1 of 1 found the following review helpful.
Nice Muzzle Brake / Suppressor Adapter
Written on Jul 27, 2025
Review for
Q Rearend, Cherry Bomb
Not a big fan of Q or their products but I was able to get this Rear End muzzle break around $50 and couldn't pass it up. Using this with DD Zilch hub and it closes up the gab between suppressor and handguard to around 3/8". Well machined and seems to have a good tight seal with suppressor hub. Does have very small wrench flats at the back and their standard 1/2" socket drive on the front. Very thin rear edge that allows brake to go further into the suppressor and hub. Well worth the $50 I paid.
1 of 1 found the following review helpful.
Nice Muzzle Brake / Suppressor Adapter
Written on Jul 27, 2025
Review for
Q Rearend, Cherry Bomb
Not a big fan of Q or their products but I was able to get this Rear End muzzle break around $50 and couldn't pass it up. Using this with DD Zilch hub and it closes up the gab between suppressor and handguard to around 3/8". Well machined and seems to have a good tight seal with suppressor hub. Does have very small wrench flats at the back and their standard 1/2" socket drive on the front. Very thin rear edge that allows brake to go further into the suppressor and hub. Well worth the $50 I paid.
1 of 1 found the following review helpful.
High Quality Precision Machined Riser
Written on Jul 13, 2025
I recently bought the Holosun HE510C-GR Green dot sight and needed something to raise it up a bit. I typically buy ADM QD mounts but saw this and really liked its look. Wish it was up another .25" but the 1.93" it raises it to isnt bad. Also wish they made a riser that mounted directly to bottom of HE510C with out the need of the Holosun stock QD mount. Either way this is a quality mount that ive see go for $199 and I got it on OP for $145 which is in line with the ADM mounts which I may still buy and use with this Scalarworks. Twish dial for QD nount is fast, simple and easy to use. I thought ADM levers were easy to manipulate but this may be the best option.
1 of 1 found the following review helpful.
IMO Best Ambi Safety
Written on Jun 16, 2025
For some time I settled on Radians Talon Ambi Safety as my favorite and best option available until i found the BAD-Azz safety line. Ive used the Lite, Pro & Elites snd their all great safeties. 60° throw IMO is better than 45 because it actually points to correct pictogram. All versions of this Safety are machined and finished extremely well. Dovetail lever slide on with reverse threaded set screw is simple fast and easiest way to install & remove Safety levers. The flip of lever has a good positive click.
2 of 2 found the following review helpful.
Best AR15 Bolt Period!
Written on May 31, 2025
Review for
JP Enterprises Enhanced Bolt Assembly
This is my 3rd JP Enhanced DLC Bolt for 223/556. These are the best quality, machined, and DLC coated bolts ive come across. Even Chad from SOTAR does a full bolt teardown and says their basically machined perfect and the DLC coating is also some of the best hes seen. These are the easiest coatings to clean and nothing sticks to it. Theses bolts are Enhanced and beefed up in multiple areas. The 2 bolts ive been using the one has about 800rnds and the other 1200rnds and honestly they bearly show any wear. If you want the best these are it and I can usually get them off OP for $110-$120 which is $30-40 cheaper than most places.
1 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?