Your Browser is OutdatedOwen from United States, PA Public Profile
Reviews by Owen
great Mag release
Written on Sep 30, 2025
Quite possibly the best shape for a mag release of all I have. You can get cheaper ones but this is definitely a better quality than ones you get on certain auction sites.
may not look like much, but it's accurate, and VERY lightweight.
Written on Sep 03, 2025
Review for
Ruger 10/22 Carbon Fiber Barrel
It may not be quite as attractive as some of the other carbon fiber barrels. However, I have several other aftermarket barrels, and I struggle to see much difference at all at 50 yards, this one is a winner and a bargain.
quality product, but had extraction and feed issues
Written on Sep 03, 2025
The part itself Is quality made and machined. I matched it with a heavy buffer from the same manufacturer. I did have feed and extraction issues however, Which is disappointing given the reviews of how well this works for other folks. I tried using it with a Sylvan arms adapter as well as the exomag magazines, as I was not using a dedicated 9 mm lower. I suspect that it had to do with the barrel not being an enhanced feed ramp, and that an EPC style barrel may have helped. I was using a PCC upper receiver without any dust cover.
0 of 1 found the following review helpful.
A bargain with great quality.
Written on Jun 08, 2025
Very nice slide, nicest one I've got now. Tungsten coating was great. Would have been nice to have the RMR cover plate. But since I put a sight on anyway, was irrelevant , plus I knew it didn't have it when I bought it, so I can't really complain. The cuts are nice, the finish in tungsten was gorgeous. No burrs, All the parts went on smoothly, and it runs smooth.
Smart design. Easy install, quality materials.
Written on Dec 10, 2024
Liked it so much I bought another. Great for doing an AR22 build with the cmmg conversion kit. Remember that when you remove the buffer tube, there's nothing to hold in your retainer pin and spring. Additionally, there will be a 3/8+ gap where the buffer would normally sit and the back of your bolt carrier group. Which should be fine for your cmmg dissent style uppers, but you'll need something to fill that gap if using the cmmg 22lr bcg because it will blow back. At first I used a piece of pex tubing, but ultimately I 3d printed a spring loaded "faux buffer" peice that allowed me to use the detent pin and spring in to hold it in place.
misleading photo
Written on Oct 17, 2024
Review for
FM Products 9mm Bolt Replacement Parts Kit
Based on the photos showing something silver, I had hope that worst case it would be chrome, best case Ti. Well, what came was black, I assume nitride (hopefully). It'll do in a pinch for a day if you break or lose one, but wouldn't trust it to stay in my BCG.
1 of 4 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?