Your Browser is OutdatedReviews by sniperofbuffalo
Quality rail, highly recommend
Written on Oct 12, 2024
Installed in my PSA premium M4A1 upper with FN barrel, wanted to build a SOPMOD-style clone without spending over $500 on a Daniel Defense quadrail. Installation was very easy and straight forward. The rail includes a wrench and packet of threadlocker for installation. I've shot around 250 rounds with it on so far and it's held up. No rattle or play whatsoever.
Excellent, handy tool
Written on Sep 09, 2024
Excellent little tool that does exactly what it was made to do. It has come in handy to change out the handguard on a few of my builds.
Very good adapter kit
Written on Oct 07, 2023
I installed this on my Maverick 88 Security. Installation was easy, it comes with instructions and the tools you will need to install. You will need a P-2 screwdriver and a 14mm socket with extension to remove your factory Maverick stock. The only tricky part is getting your grip nut to stay in place and threaded on when put your grip on, my Magpul K grip was a very tight fit. Your choice in stock may throw off your ability to line up the factory bead sight.
Very good heat shield
Written on Oct 06, 2023
Review for
ATI Outdoors Classic Shotgun Heatshield
I installed this on my Maverick 88 Security (20 inch). I originally had a polymer heatshield and I hated it, I went with this heatshield because the factory Mossbergs are unavailable. Installation was pretty easy, although not an out-of-the-box direct fit; it's a universal fit, so that should be expected. Some bending and manipulating of the shield was required to get an adequate fit on my barrel. I am much more satisfied with the fit and finish of this heat shield than the Slade Street Tactical heat shield, and I believe more durable as well.
2 of 2 found the following review helpful.
My favorite AR buffer!
Written on Sep 29, 2023
Review for
Aero Precision Enhanced Carbine Buffer Tube
My favorite buffer tube to use on AR rifles, I've used these tubes on at least 3 different builds. The ears on the bottom help lock the buffer tube in place and supports the buffer detent, as well as supports the back of the BCG providing a ramp as it goes into the tube. Definitely helps smoothen the action in my experience when used with a properly tuned rifle.
Good quality mount for triangle front sight
Written on Sep 24, 2023
I purchased this to attach to the fixed front sight of my PSA M4A1 to mount a Streamlight TLR-1 HL. Installation was easy and very straight forward, the tool you need comes included. It took me maybe 10 minutes to install, I suggest adding some blue Loctite to prevent the screws from possibly backing out. Now I can actuate my light with my thumb when I need to use it and it's not sticking out as far as if I mounted it onto the handguard. So if you're looking to picatinny mount to put a light onto an AR15 with the triangular fixed front sight, this is a great option.
I love this stock
Written on Jul 18, 2022
This is a proper stock for an AR carbine! I really dislike the stock wobble on the MOE and milspec stocks, the lock on this stock virtually eliminates that wobble. It's not as sturdy as a fixed stock obviously but it's sufficient for longer range precision shooting. I also like that it's still pretty light and has the rubber pad for traction.
Basic but good
Written on May 20, 2022
Review for
Aero Precision M4 Sliding Stock
Purchased for my standard issue M4A1 clone AR-15, I was looking for a standard M4 stock and this is it. Aero Precision is a quality manufacturer so I know I don't have to worry about the stock. My only complaint is the same complaint I have with the Magpul MOE stocks, there's too much slop when mounted on an Aero Precision standard milspec buffer tube but I think that's just normal for the design.
1 of 1 found the following review helpful.
Not recommended if you plan on actually shooting with it.
Written on May 20, 2022
Ordered this for a standard issue M4A1 clone rifle project I was working on, I figured it should be just as good as any other carry handle out there. Big mistake. When I got the handle in there was a noticeable bend in the front. The rear sight aperture would not flip to the larger one, it's center in the handle but gets stuck 3/4s the way over and wont go down. The elevation adjustment has very limited adjustability, does not bottom out and the knob is inconsistent. I'm throwing this carry handle in my parts bin just to keep on hand as a place holder until I can order something better from now on. If you're considering ordering this to save money on your AR15, I implore you to reconsider and purchase one made by a more reputable manufacturer like Aero Precision, Colt or Palmetto State Armory.
2 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?