Wasted Youth from United States, FL Public Profile

Ordered a 14.5 inch pencil barrel - weight 21 oz. Please note that the gas journal is 0.625 inch. The barrel is perfectly gassed - very flat shooting with H1 Buffer and standard carbine spring - 3 o'clock ejection with M193.

Light weight, functional, tight fitting, comfortable and versatile adjustable commercial stock that also works on a mil spec buffer tube (looser fitting but still tight - commercial style works on both size buffer tubes). This stock is better than both the Magpul MOE SL-K carbine stock (SL-K smaller butt plate better for prone) or Magpul standard MOE rifle stock (very loose/rattles). However, the Magpul stocks might be more durable due to its supported or smaller butt plate design. The MFT's heel, butt and toe slim design enables you to get a snug fit into the shoulder especially shooting standing (rapid firing) but still very comfortable in the prone position. The QD point under the stock is function if not ideal. Likewise, you can also sling through the top or rear of stock.

Good looking and lightweight but only a middle of the road effective compensator for Glock 17 slide (Reduces muzzle rise and some recoil). Actually about 75% as effective as compared to a Lone Wolf compensator/ muzzle brake (code: 59-BCM-UASG14-LWD-COMP) which is $25.00 cheaper. The PM comp requires semi- permanent installation (red Loctite), but it is initially more reliable with standard recoil spring. The Lone Wolf comp requires a lot more tuning (lighter recoil spring, hotter ammo and polishing of both barrel lockup surfaces and barrel ramp) as the side ports are angled backwards and apparently bleeds off significantly more gasses and reduces recoil more than the PM style of comp. Hotter ammo makes the gun shoot flatter and improves the reliability (FTF and stove pipe occurrences) but also increases the felt recoil. Also, I was able to use BSI Un-Clure debonder instead of heat in order to remove the PM comp as my front suppressor sight had loosened. For EDC and self defense use, I would not recommend a compensator on a 9MM hand gun due to reliability issues.

SLR Aimpoint T1 Absolute Co-Witness Mount also functions as an excellent lower 1/3 mount for the SIG Romeo 5 red dot sight which will perfectly align a Bushnell AR Optics 3x Magnifer to the Romeo 5. Very sturdy and lightweight; however, it has to be initially installed at the beginning or end of the picatinny rail and slid in position (Similar to installing Magpul MBUS sights). Will have to remove previously secured devices on the picatinny rail in order to install mount.

Very easy to install the ODIN 556mm for a tune-able device. Performance is on par with the VG6 Precision Epsilon muzzle device. However, the Strike Industries J Comp performs better - greater decrease in muzzle rise ,least horizontal movement (neutrally timed) and greatest reduction in recoil - for both 10.5 inch (carbine length gas port) and 16 inch (mid length gas port) AR length barrels. The J Comp is the quickest on follow up shots especially on a 10.5 inch barrel for a device that is half the price.

Can be used with several muzzle devices simultaneously. Different thickness allows for numerous options to time device. Quality very good - not easily deformed as with others. Cost effective and well worth the money.

GL506 Tall (3XL) on Glock 17 with Burris Fast Fire III definitely lower-lower 1/3 therefore a 5XL sight height would have been ideal. Fit and finish very good and they were similar to Glock OEM sights to install.

Very tight eye box and eye relief at 4X, otherwise good scope. Glass quality it very clear. Reticle is definitely not day light bright.
Easy to get center hits with reticle hold overs however not a precision scope. Windage and elevation easy to use. Zoom ring is adequate.
Over all a nice value low powered scope. Will be looking at a 1-6x optics next with similar 1x qualities.

L2D Combat upper parts kit SS. Issues with the firing pin assembly. Slide moves 1/4 inch rearward (out of battery?) when trigger is pulled and release strike 50% of the time on both Swenson G17 slide and OEM Glock 34 slide with OEM cover plate, OEM recoil spring and OEM Barrel. Replaced striker spring with both OEM and reduced lone wolf reduced power striker spring and slide functions 100% - No movement of slide when trigger is pulled. The supplied striker spring causes binding of striker/firing pin , however L2D Combat striker functions 100% with stock OEM Parts. NOTE: kit does NOT include COVER PLATE.

Note: kit does not include cover plate unlike others. This is not a complete slide kit. Will have to order cover plate to fully evaluate product. Fit & Finish on par with OEM, however COVER PLATE SHOULD HAVE BEEN INCLUDED IN KIT !!!!!!!!!!