Your Browser is OutdatedZ. from United States, CA Public Profile
Reviews by Z.
Works Great
Written on May 19, 2025
Review for
Wheeler Engineering Golden Rod Dehumidifier
After a few years of keeping this thing plugged in my safe, I can honestly say that it works great.
When you open the safe, you can clearly tell that it's a few degrees warmer inside than the outside, and that's all you need to prevent condensation from forming on any metal or glass parts on the inside.
Obviously, the metal rod is hot to the touch, so that's not recommended. However, it isn't hot enough to damage the carpeting on the interior of the safe or any plastic/fabric parts that may come into contact with it.
So far, so good.
When you open the safe, you can clearly tell that it's a few degrees warmer inside than the outside, and that's all you need to prevent condensation from forming on any metal or glass parts on the inside.
Obviously, the metal rod is hot to the touch, so that's not recommended. However, it isn't hot enough to damage the carpeting on the interior of the safe or any plastic/fabric parts that may come into contact with it.
So far, so good.
Nice Upgrade
Written on May 06, 2025
This is a nice little upgrade for the Smith & Wesson Shield. Mine is in 9mm.
It makes the magazine release more reachable, especially if you or someone with smaller hands is going to shoot your pistol.
The materials are on par with the rest of the pistol. Installation was quite easy, especially if you let YouTube guide you. It's not in the way to be engaged inadvertently, at least not for me.
I'm happy with it.
It makes the magazine release more reachable, especially if you or someone with smaller hands is going to shoot your pistol.
The materials are on par with the rest of the pistol. Installation was quite easy, especially if you let YouTube guide you. It's not in the way to be engaged inadvertently, at least not for me.
I'm happy with it.
Awesomely Practical!!!
Written on Apr 27, 2025
Review for
Talon Grips Handgun Grip for Smith & Wesson
These are a great addition to any polymer framed pistol that could use a little improvement in the grip department.
They work especially great with sweaty hands.
They help maintain a consistent grip with hardly any slippage due to recoil or inattentiveness.
Plus they're very easy to install. You've done more complicated things if you've built model airplanes as a child.
Would highly recommend.
They work especially great with sweaty hands.
They help maintain a consistent grip with hardly any slippage due to recoil or inattentiveness.
Plus they're very easy to install. You've done more complicated things if you've built model airplanes as a child.
Would highly recommend.
Great tool to have handy
Written on Nov 18, 2024
Review for
Strike Industries Glock All In One Tool
If you're a tinkerer or if you have to disassemble your Glock, at home or at the range, this is very handy to have.
Just toss it in your range bag, use it as a keychain, or just carry it in your pocket. It'll be out of the way until you need it.
And once you need it, all the tools you'll need for the basic stuff is right there.
Base Plate Removal Tool... Check (I haven't used it yet.)
Pin Punch Tool... Check.
Front Sight Removal tool... Check (Very handy when you need it!!!)
Just toss it in your range bag, use it as a keychain, or just carry it in your pocket. It'll be out of the way until you need it.
And once you need it, all the tools you'll need for the basic stuff is right there.
Base Plate Removal Tool... Check (I haven't used it yet.)
Pin Punch Tool... Check.
Front Sight Removal tool... Check (Very handy when you need it!!!)
It Works!!!
Written on Mar 01, 2022
This little gadget just works.
I've used it on a number of new magazines which proved to be very difficult, if not impossible, to load the last few rounds by hand.
These included the Magpul 10-rounders for the Glock 19 and the OEM 7- and 8-round magazines for the Smith & Wesson M&P Shield 9mm.
This thing makes it a breeze and let's you skip the sore thumb!!!
It could be a little cheaper though.
I've used it on a number of new magazines which proved to be very difficult, if not impossible, to load the last few rounds by hand.
These included the Magpul 10-rounders for the Glock 19 and the OEM 7- and 8-round magazines for the Smith & Wesson M&P Shield 9mm.
This thing makes it a breeze and let's you skip the sore thumb!!!
It could be a little cheaper though.
Good Storage Solution
Written on Jan 30, 2022
Review for
USML M19A1 30 Cal Ammo Cans, Grade One
Who hasn't seen or used one of these things?
Very sturdy. Very handy. Stores all sorts of things, not just ammo.
I use one of mine to carry ammo to the range, the other for various odds and ends like cleaning kits, pistol targets, eye and ear protection, etc.
Good stuff.
Can be a little hard to open, sometimes, and a little tricky to lock. But otherwise... it's a winner.
Someone online has even used these to build Bluetooth speakers. :-)
Very sturdy. Very handy. Stores all sorts of things, not just ammo.
I use one of mine to carry ammo to the range, the other for various odds and ends like cleaning kits, pistol targets, eye and ear protection, etc.
Good stuff.
Can be a little hard to open, sometimes, and a little tricky to lock. But otherwise... it's a winner.
Someone online has even used these to build Bluetooth speakers. :-)
1 of 1 found the following review helpful.
A Little Extra Protection
Written on Nov 09, 2021
Review for
Tac-Six Tactical Gun Sock
These gun socks are just great.
Great value.
I got the 42" versions and they fit everything from a 20" AR-15 to a 16" with an optic... from an 18" pump gun to an SKS rifle. They stretch in all directions to accommodate pistol grips and optics.
All good.
Just slip it on and put your long guns in the gun safe. They're protected from prying eyes, as well as from banging around inside the safe. Living in California, earthquakes are a thing and these give you some peace of mind.
Great value.
I got the 42" versions and they fit everything from a 20" AR-15 to a 16" with an optic... from an 18" pump gun to an SKS rifle. They stretch in all directions to accommodate pistol grips and optics.
All good.
Just slip it on and put your long guns in the gun safe. They're protected from prying eyes, as well as from banging around inside the safe. Living in California, earthquakes are a thing and these give you some peace of mind.
A Little Extra Protection
Written on Nov 09, 2021
Review for
Tac-Six Tactical Gun Sock
These gun socks are just great.
Great value.
I got the 42" versions and they fit everything from a 20" AR-15 to a 16" with an optic... from an 18" pump gun to an SKS rifle. They stretch in all directions to accommodate pistol grips and optics.
All good.
Just slip it on and put your long guns in the gun safe. They're protected from prying eyes, as well as from banging around inside the safe. Living in California, earthquakes are a thing and these give you some peace of mind.
Great value.
I got the 42" versions and they fit everything from a 20" AR-15 to a 16" with an optic... from an 18" pump gun to an SKS rifle. They stretch in all directions to accommodate pistol grips and optics.
All good.
Just slip it on and put your long guns in the gun safe. They're protected from prying eyes, as well as from banging around inside the safe. Living in California, earthquakes are a thing and these give you some peace of mind.
No Fuss, No Muss... Basic & Functional
Written on Nov 05, 2021
Review for
Condor Outdoor Rip Away EMT Lite Pouch
As the title says...
It's very basic and very functional.
There isn't much that can be wrong with this item. The construction quality is there. I'm sure it isn't perfect, but I've neither looked not noticed.
Who would anyway?
I used this pouch to put together a 1st Aid Kit and to attach it to my SOG Responder Bag using the MOLLE system.
Mercifully, I haven't had to use the kit yet, but it's good to know that it's there when it's needed.
For what it is, it is a little spendy though.
It's very basic and very functional.
There isn't much that can be wrong with this item. The construction quality is there. I'm sure it isn't perfect, but I've neither looked not noticed.
Who would anyway?
I used this pouch to put together a 1st Aid Kit and to attach it to my SOG Responder Bag using the MOLLE system.
Mercifully, I haven't had to use the kit yet, but it's good to know that it's there when it's needed.
For what it is, it is a little spendy though.
Basic Upgrade
Written on Sep 15, 2021
Review for
Magpul Polymer Trigger Guard
This is a great upgrade to your standard A2 flat trigger guard.
If you don't care about maintaining the "historic" look of your lower receiver, and most people don't, or if your trigger guard is somehow damaged, then this is a great way to go.
Installation is a breeze.
Gives your rifle an updated look. It comes in colors to match the rest of your furniture.
And it makes your trigger reachable with gloves.
There isn't much to this.
Sure, there are fancier trigger guards than this, but if you think about it... why?
If you don't care about maintaining the "historic" look of your lower receiver, and most people don't, or if your trigger guard is somehow damaged, then this is a great way to go.
Installation is a breeze.
Gives your rifle an updated look. It comes in colors to match the rest of your furniture.
And it makes your trigger reachable with gloves.
There isn't much to this.
Sure, there are fancier trigger guards than this, but if you think about it... why?
1 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?