Your Browser is OutdatedSome fitting was required - CMC Triggers AR-15 6-Position Mil-Spec Carbine Buffer Tube Kit
Compare (0)
1 item has been added
Add at least two items to compare
Dave's Review of CMC Triggers AR-15 6-Position Mil-Spec Carbine Buffer Tube Kit
There are a few deficiencies in this unit that need to be looked at.
1) the buffer tube is asymmetrical up front where it screws into the lower receiver. However, this caused the upper receiver to not seat into the lower. The buffer tube protrudes by fractions of an inch, but just enough to keep the upper receiver from mating with the lower. Some quick work with a file / dremel and it fit.
2) the QD end plate is a nice touch, however it too did not fit without filing.
I tested both the tube and end plate on 4 different lower receivers of different branding and none of them fit.
Aside from this, I was able to file the tube and the end plate down so that they mated correctly and functioned.
1) the buffer tube is asymmetrical up front where it screws into the lower receiver. However, this caused the upper receiver to not seat into the lower. The buffer tube protrudes by fractions of an inch, but just enough to keep the upper receiver from mating with the lower. Some quick work with a file / dremel and it fit.
2) the QD end plate is a nice touch, however it too did not fit without filing.
I tested both the tube and end plate on 4 different lower receivers of different branding and none of them fit.
Aside from this, I was able to file the tube and the end plate down so that they mated correctly and functioned.
Pros:
- Very adjustable, good finish, and function
Cons:
- some fitment required
Best Used for:
- all lawful purposes!
Would Recommend:
Yes
7 of 17
found the following review helpful.