Reviews & Ratings for LaserMax Laser Sight for Full Size Beretta 92/96 and Taurus 92/99/100/101 — 49 reviews — Page 1

Green dot, not red. I prefer the green. Easy istall and good directions. Site doesn't alter or interfere with the existing outline of the pistol. I strongly recommend this site to all Beretta owners.

Great product very easy to install, directions need to be more precise for a new gun user but as a retired Army man I thought it was pretty easy.

The only problem I have is that the laser pulses and even though I read the directions several times and followed them. I have been unable to get the laser to stop pulses and just have a steady beam of light.

Disassembly latch is not a replacement for OEM. Pistol can not be reassembled with replacement latch installed. First purchase failed, exchanged for a second which also failed for the exact same reason. Kudos to Optics Planet's hassle free exchange of first and then return of second. It would be nice to be able to put pics on the review which would easily show the problem. Replacement latch could be modified with a file to allow reassembly but it would still not be long enough to be properly supported on both ends by the frame causing a potential safety issue.

Great product love the service from the staff at opticsplanet

Took the new Beretta 92 with the new and installed LaserMax Laser Sight to the range today. First shot with just iron sights to get a feel for the Beretta, it grouped well. Put new target up and used Lasermax, it also grouped well, had to correct for point of aim, but it was consistent in grouping. Based on my personal experience, it was worth the price. It is very easy to install. Step 1 remove the slide as you normal would, put frame to the side. Remove guide rod and spring and replace guide rod with Lasermax rod. reinsert into slide, make sure the flat side of the back of the rod rides on the barrel. Step 2 pick up your frame and turn the take down lever past it's normal position until lever id pointing up from frame, pull it out, be careful the button on the other side doesn't fall out. Place the supplied take down lever into the frame with lever pointing up. when it's in, depress button and rotate lever to the downward position, you might have to push a little more than usual, but it will rotate. Reinstall slide and rotate lever to normal position. rack slide to make sure all functions correctly. On right side of pistol push the extended part of take down lever laser should come on. to shut laser off, depress button in center of take lever on the lever side of frame. All in all, easy installation, easy on and off and it was consistent.
Hope this helps

I went out to the range and shot off a full couple hundred rounds. It didn't take long to figure out the laser and my red dot sight were off when I aligned my sight to the laser. Our grouping was off. The laser is definitely convenient. However, if you like to lube your spring, beware, a touch too much oil on the contact surfaces will interfere with the ground of the laser. So if yours isn't lighting up this is most likely the problem. Also the spring is impossible to precision fit and hold the laser assembly perfectly straight. So the laser will be off a full three or more inches at 30ft no matter what you try as the assembly will slightly skew off center as the spring twists, which causes it to expand and it is what holds the laser in place. This will inevitably push or allow the laser to slightly move off to one side or the other. So if you want an exact laser sight that is precise, this isn't the one. Get a solid gun mount version. However, this one is bright and it is very easy to install and activate. I have several reasons I am not a flashlight guy with a pistol, half of them due to legal ramifications. The other due to blinding the user with that same light leaving you night blind. But this mod does leave room for one if that is your thing. And at night it is super bright, so if you need to find your target, you will without needing any extra light. This laser will definitely do that! In full summer daylight we had some trouble seeing it on certain targets, if at all....
Read More...

I found it very easy to install. The instructions were well written and easy to follow. I did it in less than 10 minutes. There are videos available on their website but I didn’t need them. I’m sorry I didn’t get one sooner for my Beretta 92!

Save your money! Yes, it is easy to install. Yes, it is easy to turn on and off. That's where the positive comments stop. Once you start firing rounds it will turn on, then will stop working until you fidget with the switch. The problem persisted through 150 rounds of 9mm. I am sorry that I spent the money for this. My advice avoid this and pick a different laser...

Installation easy, fits perfectly. Only problem is that it is supposed to operate with push button from either side of the replacement disassembly latch. By design, when the push buttons (right and left) extend equally on either side of the latch there is no electrical contact (default laser off position). This is accomplished by a non-conductive stripe that is supposed to be painted in the center of the lever. The lever I received was painted off-center (likely an overlooked manufacturing defect) and so the laser operates when the button is pushed to the center position and to the far left. Normally, I would have returned the product for a replacement but find that since I am a right-handed shooter, I will always operate the on position with my right forefinger and having the off (default) position with the button extended to the far right makes it easier to identify tactilely and so I actually prefer this.