Reviews & Ratings for Leapers UTG Compensation Scope Mount for RWS Airgun w/ T06 Trigger

Leapers UTG Compensation Scope Mount for RWS Airgun w/ T06 Trigger

Currently Unavailable View Product

Write a Review

Compare (0)

Most Helpful Positive Review Excellent Scope Mount

I'm using this scope mount on my RWS 54 Air King 22 Cal. which is brutal on scopes and mounts. So far I have had no issues with this mount loosening or holding zero. Mount is high quality for the price with distinct markings and tight fit. Compensating for the 10 degree barrel droop worked perfect ...
Read More...

Most Helpful Negative Review Mount will not compensate a severely drooped barrel

Ordered the MNT-DNT06 for use on a new Diana RWS Model 34 .22 cal. Although the mount has a moderate amount of droop compensation designed in it is not enough if you are unlucky enough to receive a RWS break barrel with severe droop. At full up elevation adjustment with three separate scopes of var...
Read More...

Show

Sort by

Filter by

Good quality

by Hypo, Verified Owner from LA, United States Written on March 26, 2024

Good quality and Fits perfectly. Looking forward to buy more from Optics.

Was it helpful to you? Yes | No

Reverse Installation

by Gahymo, from OK, United States Written on February 20, 2019

Bought this for my RWS 34-T06 in .22cal. After installing and shooting a few test rounds, it wouldn't even hit the paper at 10 yds. WTH. When I aimed around 10" low it hit the top of the target. This is about a 15" elevation difference. Even maxing the crosshair elevation wouldn't even get close. After studying this a bit I decided to reverse the compensator and re-center the crosshairs. First shot at 10yds, about an inch low. Minor elevation adjustment, BAM, bullseye. Worked my target at different distances to a maximum of 30 yards. Minor elevation adjustments and now I'm covering a dime at 30 yards. Go figure. Instead of droop, I guess my barrel is on Viagra. Bottom line, I made this thing work and am happy with my results.

Pros:

made well, good construction & materials used.
Made well and looks good

Cons:

Would be nice if the instructions explained the numbers on top. I had to go online and find it.

2 of 3 found the following review helpful.

Was it helpful to you? Yes | No

Solid mount with good quality!

by Hunter, Verified Owner from OH, United States Written on March 12, 2016

Purchased this mount for my RWS 34 to compensate for barrel droop. Works great and this mount is very solid. Doesn't slip under recoil and being able to use common Weaver base rings allows me to choose from a variety of rings.

1 of 1 found the following review helpful.

Was it helpful to you? Yes | No

Compensation scope mount

by FireWalker, Verified Owner from NY, United States Written on January 1, 2016

Found this mount to be quite sturdy. using it mainly for a red dot scope at moment, but plan to use it with a day/night scope soon. Sometimes a red dot will not fine tune in elevation when using risers, but this one will compensate for a bit of that to zero it in more.

Was it helpful to you? Yes | No

Works as Advertised

by Hank, Verified Owner from NH, United States Written on April 8, 2015

Installed on an RWS 54 .22 Had bottomed out on elevation on a 3-12 scope using another mount. Elevation has been raised substantially. Also, Not one screw has come loose after 200+ rds. I am very happy with this mount and will be ordering another for an R1.

1 of 1 found the following review helpful.

Was it helpful to you? Yes | No

As advertised

by Larry from Kalifornia, Verified Owner from CA, United States Written on March 23, 2015

Precision machined. Came with extra screws of each size and hex drive (Allen wrenches -- metric).
Torque vales are provided. Unfortunately, I have been unable to find a 1/4" drive metric hex drive wrench. Bits are available at Brownells but the shipping is 3X the cost of the bit. The purpose of this part is compensate for barrel droop on break-barrel air rifles after lock-up. Probably not needed at under 50 yds. But at farther range, the scope is going to require lots of clicks w/o one of these compensators. Only costs a few bucks.

Pros:

Low Cost.

Cons:

None

Was it helpful to you? Yes | No

another quality product

by Mac, from AR, United States Written on January 15, 2015

A perfect fit for the model 34 in combination with the UTG max strength rings under a Leapers UTG scope. Over 500 shots so far and nothing has moved. Very pleased with this product and with the prompt service from Optics Planet.

Was it helpful to you? Yes | No

Perfect for RWS 48

by pops, Verified Owner from TX, United States Written on December 24, 2014

Does exactly what it was designed to do. Will be ordering another or two for future RWS rifles.
Using it with the Leapers Max Strength Piccatiny rings and a Hawke Airmax scope. Scope was easy to sight in with his combination. Used Blue Loctite on mount and also on rings.

Pros:

None

Cons:

None

4 of 4 found the following review helpful.

Was it helpful to you? Yes | No

great item

by abowajeeh, Verified Owner from Saudi Arabia Written on August 1, 2014

This item is working well with rws diana magnum 350 airgun ... it is really holding scope well and holding zero too ...
Also, its suitable for all rws spring airgun whatever type of trigger T06 or T05 .

1 of 1 found the following review helpful.

Was it helpful to you? Yes | No

Needed if you use a T06 with optics

by Legacy Reviewer, from WA, United States Written on March 23, 2014

Cleaned up the barrel droop immediately! I only learned recently this was a feature not a machining issue. These high end air rifles are designed this way to mount peep sights. The factory mounts correct for this - which is only only good with full sized scopes. I wanted to mount a compact 4x32 leapers on the RWS 460 - -Perfect!!!
Pros: Works as advertised - Very solid!
Cons: None

1 of 1 found the following review helpful.

Was it helpful to you? Yes | No

There are no reviews that match your criteria. Would you like to review this product?

FREE SHIPPING on Over 250,000 Products

Enjoy our FREE RETURNS

Reviews & Ratings for Leapers UTG Compensation Scope Mount for RWS Airgun w/ T06 Trigger — 15 reviews — Page 1