Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
NOT A LITTLE FOREGRIP....
IF YOU HAVE LARGER HANDS THIS IS THE GRIP FOR YOU. ATTACHES EXTREMLY EASY TO A PICATINNY RAIL, GIVES YOU GREAT CONTROL WHILE FIRING, AND THE CONCEALMENT COMPARTMENT IS PERFECT FOR EXTRA BATTERIES, TOOLS, AND ETC. I LIKE THIS GRIP SO MUCH I HAVE IT ON THREE DIFFERNT RIFELS. SO IF YOU REALLY NEED A LA...
Read More...
Read More...
Most Helpful Negative Review
Poor Ergonomics
The finger grooves force your hand to be parallel to the rifle. However, your arm is not so you must twist your wrist to fit your fingers in the grooves. The compartment door has no snap fit so it slides open on it's own. Can't trust to keep items in it.
Pros: Installs and holds well
Cons: doesn'...
Read More...
Read More...
Not very good
The grip has to slide on to the pic rail and once you get it tight enough so it doesn’t wiggle around, the screw head starts deforming the rubber inside into the pic rail which prevents the grip from coming back off.
Poor design.
The feel of the grip is nice but that’s about it.
The compartment door falls off a lot too.
Poor design.
The feel of the grip is nice but that’s about it.
The compartment door falls off a lot too.
Pros:
- Cheap
Cons:
- Low quality
Best Used for:
- Paperweight
Would recommend: No
leapers foregrip
fit great and feels good in hand. Bolted on as expected, and completed my fire. Cant wait to shoot it.
Would recommend: Yes
Nice grip, large finger grooves
Feels well-made and comfortable to hold. Goes well with my JE Machine Tech Ergonomical Grip
Would recommend: Yes
Beefy and sturdy
This is a great fore grip. Easy to install. Fits well on a factory installed picatinny rail. Had to use shim for aftermarket mlok to picatinny. Fits well in large hands.
Pros:
- ergonomic
- beefy
Cons:
- None
Best Used for:
- Shotgun (12 Gauge)
Would recommend: Yes
Leapers UTG Ambidextrous Combat Foregrip
I am satisfied with the quality for the price for this foregrip. As noted by some reviews, the fit was a bit loose on the factory picatinny rail on my firearm. I was going to add another throughbolt and nut to get a better "squeeze" on the rail but thought I would try something else first. I clamped the grip upside down in my vise to close the gap up a bit--about a 1/8", then heated the top part of the grip that needed tightening with my heat gun, going all around the grip to soften it up. I did that for about 60 seconds, then rapidly cooled it with a damp cloth. So far it has held tight--in fact to install it I had to tap in onto the rail with a small hammer.
I don't mind having to modify inexpensive parts since I am not expecting a Ferrari for the price of a Yugo...
I don't mind having to modify inexpensive parts since I am not expecting a Ferrari for the price of a Yugo...
Pros:
- GREAT PRICE
- very comfortable grip
- matches my existing pistol grip
Cons:
- fit could have been tighter from the factory
Would recommend: Yes
Comfy hand grip
It is a good shaped grip for the hand and the material is not slippery, easy to hold, comfortable even when using a tight grip.
The material is tough enough that you can really crank the bolt until the handle is tight. The bolt protrudes a bit out beyond the nut on the other side, but not much and you can get it tight. (If you don't like the bolt extending out a couple of millimeters, you could grind it down flat with the nut.) Good purchase!
The material is tough enough that you can really crank the bolt until the handle is tight. The bolt protrudes a bit out beyond the nut on the other side, but not much and you can get it tight. (If you don't like the bolt extending out a couple of millimeters, you could grind it down flat with the nut.) Good purchase!
Would recommend: Yes
Better than I had hoped!
I have this grip on my Black Aces Tactical Bulldog, 12ga. bullpup semi-automatic shotgun and it is just chonky enough to give a nice firm comfortable grip to use and looks great on my shotgun.
Everyone who fires my shotgun loves the feel of this foregrip.
Everyone who fires my shotgun loves the feel of this foregrip.
Pros:
- Price, fit, feel and function.
Cons:
- None Absolutely None
Best Used for:
- For my Shotgun
Would recommend: Yes
3 of 3 found the following review helpful.
inexpensive foregrip
This is a nice foregrip, inexpensive, and features a builtin storage compartment for your hex keys, etc. As far as hand size goes, I typically wear a large in gloves. This grip feels a little bulky in my hand, but the design is great, it works, it's reasonably priced, and easy to mount. I first mounted a relatively short poly Magpul picatinny rail to the underside of my m-lok fore guard, then proceeded to try it out. It took several location changes to get it where it felt most natural and comfortable. If I did it again, I would purchase a longer picatinny rail so I could adjust the placement of the grip, instead of having to move the rail each time. Another great Leapers product.
Pros:
- ergonmic
Cons:
- Bulky
Best Used for:
- AR platfrorm 15
Would recommend: Yes
1 of 1 found the following review helpful.
Great for the money
First thing first, the grip works well for what it’s intended for. It’s a okay product that serves the budget minded builder. Secondly, shipping sucks!!!! 10 days to deliver and it bounced around Chicago for 7 days. Optics Planet needs to step up their game.
Pros:
- GREAT PRICE
- Grea price
Cons:
- Shipping
Would recommend: Yes
2 of 2 found the following review helpful.
Great forward grip with a small issue
The grip is a very good grip and ergonomic, but was very tight on the lower rail of my bullpup. I had to tap it on with a soft-faced mallet. The lower slide compartment needs attention by the maker. The sliding lid moves too easily and can come open.
Pros:
- Good,snug, ergonomic
Cons:
- A little too tight on the rail, sliding compartment lid is too loose
Best Used for:
- Rifles...shotguns
Would recommend: Yes
2 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?