Your Browser is Outdated
Lee 90055 Lube & Sizing Kit One Kit .452 Standard 7/8" X 14" Threads
$41.19
$35.46
Save 14%
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Works as advertised
Works great in my single stage press. Not much can go wrong with it so I will have years of service. The removable canister on top makes it easy to empty and start sizing again. Plenty of good times ahead making sure my .45s are ready for use.
Lee 90055 .452 Lube & Sizing kit
This Lee 90055 .452 Lube & Sizing kit works awesome. It sizes my powder coated bullets to its exact .452 - .4525 measurements. It is a true time saver. Is is a must have for your reloading bench.
Thanks again OpticsPlanet!!!
Thanks again OpticsPlanet!!!
Pros:
- sizes perfectly .452
Cons:
- None
Would recommend: Yes
Lee 90055 .452 Lube Sizer die
This Lee 90055 sizer die works awesome. I powder coat them first then size than after they have cooled down. It sizes them perfect to a .452. I do highly recommend this die if you powder coat your cast bullets. Thanks
Pros:
- East to use
- sizes perfectly .452
Cons:
- None
Would recommend: Yes
Great Bullet Mold
Lee makes top quality bullet molds and sizing dies. I cast many different caliber bullets and I only use Lee! You can't beat the price, or the quality. Optics Planet has great prices and customer service. Thanks Optic Planet!
Pros:
- quailty and Price
Cons:
- None
Would recommend: Yes
quick and easy
I had some lead bullets that were a little too big around and I wanted to put gas checks on them. so I bought this to size the bullets and to press the gas check on them.some people like to make their own bullets well you have to have a way to check the bullets to make sure they will fit your brass and the lube helps keep your barrel clean
Would recommend: Yes
Lee Bullet Sizing and Lubing Lit
Great value for the money in comparison to any other brand. It is very easy to use. All needed is a single stage press to go with this kit on your work bench. First tumble lube the cast bullets in the container with a little alox thin coat. Then run the bullets through the sizing die when the lube coating is waxy dry. After that, tumble lube the sized bullets a second time until they get evenly coated with alox. Let the bullets sit dry on wax paper. The bullets is ready for reloading. It shoots reasonably clean and quite accurate with my 1911. This is whole lot cheaper than factory ammo. Great for target practice without being ripped off by ammo sales.
Would recommend: Yes
Lee 90055 Lube & Sizing Kit One Kit .452
I have several of the Lee 90055 Lube & Sizing Kits that I use for sizing of my cast bullets.
I have them in .357 to size my 9mm and .358 o size for my .38 revolvers.
I tumble lube prior to the sizing and lube again after resizing.
I have them in .357 to size my 9mm and .358 o size for my .38 revolvers.
I tumble lube prior to the sizing and lube again after resizing.
Would recommend: Yes
Lee 90055 Lube & Sizing Kit One Kit .452 Standard 7/8" X 14" Threads
works great but make sure you get the .451 for lead bullets. Trust me. Its a very nice tool to have if you cast your own lead bullets. A must have.
I made the mistake and purchased the .452 first. It worked, but the .451 is what works best.
I made the mistake and purchased the .452 first. It worked, but the .451 is what works best.
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?