Your Browser is Outdated
Lyman Shotgun Bullet Mould: 12 Gauge Hollow Base - Sabot Slug (12ga Sabot) - #SC12 2654112
$122.95
$107.99
Save 12%
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Heavy bear stoppers
This mould drops shotgun slugs that look like overgrown air rifle pellets, and that's a good thing! These slugs are about .683" diameter and about .775" long and are easy to load because you put them in regular shotgun wads and fold crimp the shells (no silly roll crimp). The slugs as cast from wheelweights weigh about 520 grains. They shoot very well from my smoothbore 870 (tested at 7 and 22 yards)and I've read they will shoot better from a rifled barrel. For this mould you insert a steel plug (included with mould) into the base of the mould when pouring in the lead. When you open the mould,...
Read More...
Read More...
12ga Lyman sabot mold
Received my Lyman mold on 6/17/21, great mold, cast good slugs after you get it hot. I have cast some test slugs and went to the range. they shot great but I will have to lower my load a little bit. The 525 slug with my load, recoil was just a little bit to much for me. getting older I guess. I will reload some more and go again, that is fun of reloading. All said and done. It was a great price, service and shipping. thank you. JROCK.
Would recommend: Yes
1 of 1 found the following review helpful.
Sabot molds
Very happy with the result about the result for the 12 gauge mold but have to work more at it ulfor the 20 gauge molds
The price was wonderful and very much apprciated that opticsplanet.com
I shot about 20 round and very good 3 inch grouping Highly recommanded. Thank you
The price was wonderful and very much apprciated that opticsplanet.com
I shot about 20 round and very good 3 inch grouping Highly recommanded. Thank you
Would recommend: Yes
2 of 2 found the following review helpful.
12 ga. Sabot Slug
The Lyman Slug Mold is a quality made product. I was able to use a spare set of Lee handles. After the mold gets up to temperature, it casts a wicked looking slug. I cant wait to load up a few and test their performance.
Would recommend: Yes
1 of 1 found the following review helpful.
Lyman 12 ga slug mold
No handles, you have to buy handles separately. For the cost they should have been included.
Pros: Nice size--makes a 1 1/8oz slug or 525 grain.
Cons: No handles, you have to buy handles separately. For the cost they should have been included.
Pros: Nice size--makes a 1 1/8oz slug or 525 grain.
Cons: No handles, you have to buy handles separately. For the cost they should have been included.
Would recommend: Yes
2 of 5 found the following review helpful.
great slug mold
This is an awesome slug mold it allows me to use my Mec reloader with standard crimp to load hundreds of rounds to shoot out of my saiga and so far they seem very accurate, only molding one at a time can be time consuming but it is a small price to pay considering how much factory slugs cost and the amount of savings you will get out of this mold
Pros: stays cool, cavity pin works great
Cons: only molds one at a time
Pros: stays cool, cavity pin works great
Cons: only molds one at a time
Would recommend: Yes
3 of 3 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?